Benefits
Comfortable for Barefoot Use
The fine-textured resilient surface is designed for areas where users may walk or stand barefoot.
Suitable for Wet Environments
The water-resistant acrylic adhesive makes 3M Safety-Walk 280 suitable for selected wet-area applications.
Fine, Non-Mineral Surface
Unlike aggressive mineral-coated industrial anti-slip tapes, 280 uses a fine-textured non-mineral vinyl surface.
White Appearance
The white finish can integrate well with bathrooms, pools, spas, recreational facilities and light-colored equipment.
Flexible Application Options
The material can be supplied in standard configurations or evaluated for custom sizes and shapes.
Technical Specifications
| Property | 3M™ Safety-Walk™ 280 |
|---|---|
| Product Series | 200 Series Fine Resilient |
| Product | Safety-Walk 280 |
| Color | White |
| Surface Material | Vinyl |
| Surface Type | Fine-textured, non-mineral |
| Adhesive Type | Acrylic pressure-sensitive adhesive |
| Adhesive Characteristic | Water-resistant |
| Approx. Applied Thickness | 0.60 mm |
| Approx. Applied Weight | 640 g/m² |
| Minimum Application Temperature | 10°C |
| Minimum Service Temperature | 10°C |
| Maximum Service Temperature | 66°C |
| Intended Traffic | Wet and barefoot traffic |
| Typical Application | Showers, tubs, pools, hot tubs and recreational areas |
Exact dimensions, packaging and SKU availability may vary by market and configuration. For commercial purchasing, the specific 3M product number should be confirmed before quotation.
Applications
Bathroom & Shower Applications
3M Safety-Walk 280 can be considered for:
- Shower floors
- Bathtubs
- Bathroom steps
- Wet-area access surfaces
- Other barefoot bathroom areas
Swimming Pools & Spas
- Swimming pool surroundings
- Hot tub areas
- Spa facilities
- Pool access areas
- Recreational water facilities
Marine & Water Sports
- Boats
- Surfboards
- Water sports equipment
- Wet recreational equipment
Commercial & Recreational Facilities
- Locker rooms
- Fitness facilities
- Aquatic centers
- Hotels and hospitality facilities
- Recreational areas
Compatible Materials
3M does not provide a universal substrate list covering every possible application. Actual adhesion depends on the substrate, surface condition and environmental exposure.
Potential substrates for evaluation may include:
- Metal
- Painted metal
- Fiberglass
- Vinyl surfaces
- Smooth plastics
- Coated surfaces
- Bathroom fixtures
- Pool equipment
- Recreational equipment
For low-surface-energy plastics, rough surfaces, contaminated surfaces or continuously wet applications, application testing is recommended before production use.
Industries
- Bathroom & Sanitary Products
- Swimming Pool & Spa
- Fitness & Recreation
- Marine & Water Sports
- Hospitality
- Commercial Facilities
- Aquatic Facilities
- Sports Equipment
- Recreational Equipment
Why Choose 3M Safety-Walk 280?
Fine Resilient 200 Series
3M Safety-Walk 280 is specifically positioned within the Fine Resilient 200 Series, rather than the more aggressive mineral-coated industrial categories.
Designed for Wet & Barefoot Areas
Its primary advantage is its suitability for wet areas where barefoot traffic is expected.
Non-Mineral Surface
The fine-textured vinyl surface provides a different user experience from coarse mineral abrasive anti-slip tapes.
Water-Resistant Acrylic Adhesive
The adhesive system is designed for applications where moisture resistance is important.
White Surface
The white color provides an option for applications where a less visually aggressive appearance is preferred.
Custom Converting
For OEM and industrial projects, custom converting options such as slitting, custom-width rolls and die-cut shapes can be evaluated according to the application and quantity.
Installation Guide
1. Clean the Surface
Before application, remove:
- Dust
- Dirt
- Oil
- Grease
- Wax
- Loose particles
- Moisture
The substrate should be clean, dry and structurally sound.
2. Measure the Application Area
Determine the required:
- Width
- Length
- Shape
- Quantity
For steps, tubs or equipment, pre-cutting the tape can simplify installation.
3. Position the Tape
Position the material before removing the release liner completely. Make sure the location provides the desired coverage.
4. Remove the Release Liner
Gradually remove the liner while applying the tape to avoid contamination and air entrapment.
5. Apply Firm Pressure
Press the tape firmly against the substrate. A suitable roller can be used to improve contact between the adhesive and substrate.
6. Inspect the Edges
Check that the edges are firmly bonded and free from lifting or wrinkles.
For applications exposed to substantial moisture, particular attention should be paid to surface preparation and edge protection.
Storage
Store 3M Safety-Walk 280 according to the applicable 3M product documentation.
Recommended practices include:
- Keep the product in its original packaging.
- Store in a clean and dry environment.
- Protect from direct sunlight.
- Avoid excessive heat and humidity.
- Keep the packaging sealed until use.
- Protect the adhesive surface from contamination.
- Follow the shelf-life information applicable to the specific SKU and production batch.
For commercial projects, the latest 3M technical documentation and product label should be used for exact storage and shelf-life requirements.
FAQ
What is 3M Safety-Walk 280?
3M Safety-Walk 280 is a white, fine-resilient, non-mineral anti-slip vinyl tape designed primarily for wet areas and barefoot traffic.
Is 3M Safety-Walk 280 suitable for showers?
Yes. Showers and tubs are among the typical applications associated with 3M Safety-Walk 280.
Can 3M 280 be used around swimming pools?
Yes. 3M identifies applications around pools and hot tubs for this product category.
Is 3M Safety-Walk 280 a mineral abrasive tape?
No. 280 is a fine-textured, non-mineral vinyl anti-slip product. This distinguishes it from mineral-coated Safety-Walk products such as many 600 and 700 Series products.
What is the difference between 3M 280 and 3M 620?
The two products have different designs and application positioning.
3M Safety-Walk 280
- White
- Fine Resilient 200 Series
- Non-mineral
- Fine-textured vinyl
- Wet and barefoot applications
3M Safety-Walk 620
- Clear
- General Purpose 600 Series
- Mineral-coated
- Designed for broader light-to-heavy shoe traffic
What is the difference between 3M 280 and 3M 370?
Both are resilient, non-mineral Safety-Walk products, but they belong to different series.
280: Fine Resilient 200 Series, primarily wet and barefoot traffic.
370: Medium Resilient 300 Series, intended for barefoot or light shoe traffic.
What sizes are available for 3M Safety-Walk 280?
3M offers multiple width and length configurations depending on the market. Exact SKU availability should be confirmed for the customer’s region and required packaging.
Can 3M Safety-Walk 280 be die-cut?
Custom shapes and sizes can be evaluated for Safety-Walk applications. For OEM projects, the required dimensions, shape, quantity and application environment should be provided for assessment.
Is 3M 280 suitable for heavy industrial floors?
It is not the first-choice product based on its primary positioning. For heavy shoe traffic and demanding industrial environments, the 600 or 700 Series may be more appropriate depending on the specific conditions.
Downloads
Available upon request:
- 3M 280 Anti Slip Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Adhesive Tape Selection Guide
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.
