Benefits
-
Helps reduce electromagnetic interference in electronic assemblies.
-
Supports electrical continuity between suitable bonded surfaces.
-
Provides a practical solution for grounding and static charge dissipation.
-
Conforms to curved and irregular surfaces.
-
Supports precision die-cut parts for electronic components and enclosures.
-
Helps simplify prototyping, troubleshooting, and electronic design work.
-
Offers a lightweight, thin shielding solution where a conductive aluminum foil construction is suitable.
Technical Specifications
| Property | Typical Specification |
|---|---|
| Product name | 3M™ EMI Aluminum Foil Shielding Tape 1170 |
| Product number | 1170 |
| Backing material | Dead-soft, flat aluminum foil |
| Adhesive type | Electrically conductive acrylic pressure-sensitive adhesive |
| Color | Silver |
| Backing thickness | 0.051 mm (2 mil) |
| Total tape thickness | 0.076 mm ± 0.008 mm (3.0 ± 0.3 mil) |
| Adhesion to steel | Minimum 2.7 N/cm |
| Breaking strength | Minimum 25 N/cm |
| Electrical resistance | Maximum 0.010 Ω/in² under the specified test conditions |
| Shielding effectiveness | Average 69 dB over 300 kHz–2.5 GHz, according to the June 2021 TDS |
| Service temperature | Product page lists -40°C to 130°C; confirm suitability for the actual application |
| Flame retardancy | UL recognized under UL 510A, Category OARC2, File E17385 |
| Release liner | Removable liner |
| Shelf life | 5 years from manufacture under the specified storage conditions |
| Standard roll formats | Multiple widths and lengths; check the specific product configuration |
Important: Electrical resistance and shielding effectiveness depend on test method, frequency, substrate, contact pressure, surface condition, and installation geometry. These values are typical or minimum published specifications, not universal guarantees of finished-system performance.
Applications
-
EMI/RFI shielding in electronic devices
-
Grounding and electrical contact applications
-
Static charge draining
-
Cable wrapping and shielding
-
Seams in shielded rooms
-
Electronic enclosures and assemblies
-
Surface contact with suitable non-solderable materials
-
Electrical design, prototyping, and troubleshooting
-
Precision die-cut shielding components
Compatible Materials
Subject to electrical and adhesion testing, 3M 1170 may be suitable for:
-
Aluminum and other compatible metal surfaces
-
Electronic enclosure surfaces
-
Printed circuit board assemblies
-
Selected plastic and polymer surfaces
-
Shielded cable and enclosure components
-
Other substrates requiring conductive contact
Adhesion and electrical performance depend on substrate composition, surface finish, contamination, contact pressure, and grounding design. Verify compatibility and electrical continuity on the actual assembly.
Industries
-
Electronics manufacturing
-
Electrical equipment
-
Telecommunications
-
Computer and peripheral manufacturing
-
Automotive electronics
-
Aerospace electronics
-
Industrial control systems
-
EMI/RFI testing laboratories
-
Electronic product design and prototyping
Why Choose 3M 1170 Aluminum Foil Shielding Tape?
3M 1170 combines a thin aluminum foil backing with an electrically conductive acrylic adhesive, allowing the tape to provide both shielding coverage and conductive contact through the adhesive layer.
Its dead-soft foil backing, removable liner, and flame-retardant recognition make it suitable for a range of electronic shielding and grounding applications. The tape can also be converted into custom shapes for component-level shielding and production assembly.
For critical applications, validate shielding effectiveness, electrical resistance, grounding continuity, flame-retardancy requirements, and environmental performance in the finished assembly.
Installation Guide
-
Confirm the requirements: Identify the shielding frequency range, grounding design, required electrical continuity, and environmental conditions.
-
Prepare the surface: Remove dust, oil, oxidation, moisture, and other contaminants using a method compatible with the substrate.
-
Measure and cut: Select the appropriate tape width and length or use precision die-cut components.
-
Position the tape: Align the tape carefully and avoid wrinkles, gaps, or unnecessary stretching.
-
Apply firm pressure: Press evenly to establish intimate contact between the conductive adhesive and the substrate.
-
Check continuity: Measure electrical resistance across the bonded interface where required.
-
Validate shielding performance: Test the completed assembly using the project’s specified frequency range and test method.
Storage
-
Store in humidity-controlled conditions in the original packaging.
-
The 3M TDS specifies a storage temperature of approximately 10°C to 27°C (50°F to 80°F) and relative humidity below 75%.
-
Protect the tape from direct sunlight, moisture, dust, and contamination.
-
Avoid damaging the foil edges and release liner.
-
The stated shelf life is five years from the date of manufacture when stored under the specified conditions.
-
Refer to the latest 3M documentation for current storage recommendations.
FAQ
1. What is 3M 1170 aluminum foil tape used for?
It is designed for EMI/RFI shielding, grounding, static charge draining, cable wrapping, shielded-room seams, and conductive contact applications.
2. Is 3M 1170 electrically conductive?
Yes. It uses an electrically conductive acrylic adhesive containing conductive particles that help create electrical paths between the application surface and the aluminum backing.
3. Is 3M 1170 suitable for EMI shielding?
Yes. EMI/RFI shielding is a primary application. Actual shielding effectiveness depends on frequency, substrate, seam design, contact quality, and installation.
4. What is the thickness of 3M 1170?
The aluminum backing is approximately 0.051 mm thick, and the total tape thickness is approximately 0.076 mm, according to the June 2021 technical data sheet.
5. Is 3M 1170 flame-retardant?
The 3M technical data sheet identifies the product as UL recognized for flame retardancy under UL 510A, Category OARC2, File E17385. Confirm the applicable requirements for the finished product.
6. What is the temperature resistance of 3M 1170?
The 3M product page lists a temperature range of -40°C to 130°C. Confirm that this range applies to the intended use conditions and the current product documentation.
7. Can 3M 1170 be die-cut?
Yes. Its removable liner supports handling and converting, and 3M identifies the product as suitable for die-cutting. Custom shapes and sizes may be available through authorized converters.
8. Can 3M 1170 be used for grounding?
It can support grounding and conductive-contact applications when correctly designed and installed. It should not be assumed to replace a dedicated grounding conductor or meet every electrical safety requirement.
9. Is 3M 1170 RoHS compliant?
3M product information identifies the tape as compliant with RoHS 2011/65/EU. Request current regulatory documentation when compliance evidence is required for a specific project.
10. Does 3M 1170 provide the same shielding effectiveness in every application?
No. Shielding performance varies with frequency, substrate, contact quality, seam configuration, and installation. Test the complete assembly when shielding performance is critical.
Downloads
Available upon request:
- 3M 1170 Aluminum Foil Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.






