Benefits
- Helps shield selected components and materials from heat exposure.
- Supports reliable seaming, sealing, and splicing in high-temperature applications.
- Conforms to irregular surfaces for effective coverage.
- Helps distribute heat around covered components.
- Simplifies the handling of custom-cut tape components with its release liner.
- Supports automated or manual converting processes, depending on the application.
- Provides a practical option for thermal insulation assemblies and industrial equipment.
Technical Specifications
| Property | Typical Specification |
|---|---|
| Product Name | 3M™ High Temperature Aluminum Foil Tape 433L |
| Product Number | 433L |
| Backing Material | Aluminum foil |
| Adhesive Type | Clear silicone pressure-sensitive adhesive |
| Color | Silver |
| Backing Thickness | 0.05 mm (2 mil) |
| Total Tape Thickness | 0.09 mm (3.6 mil) |
| Liner Material | PET film |
| Liner Thickness | 0.07 mm (2.9 mil) |
| 180° Peel Adhesion | 4.4 N/cm (40 oz/in), typical |
| Tensile Strength | 35 N/cm (20 lb/in), typical |
| Elongation at Break | 3.5%, typical |
| Temperature Use Range for Removable Applications | -54°C to 190°C |
| High-Temperature Performance | Limited exposure up to 316°C (600°F), under specified conditions |
| Flame Resistance | Meets FAR 25.853(a) requirements, according to 3M literature |
Note: These are typical values from 3M technical documentation and should not be used as guaranteed specifications. Temperature performance depends on exposure duration and application conditions. At high temperatures, the adhesive gradually thermosets, becoming firmer and losing pressure sensitivity while continuing to hold the tape in place. Confirm the latest technical data sheet for the intended market and application.
Applications
- High-temperature heat shielding
- Thermal insulation wrapping and sealing
- Seaming and splicing aluminum foil
- Splicing jumbo rolls of aluminum foil
- Securing the final wrap of narrow aluminum foil rolls during metal annealing
- Covering selected heating elements or wires to help distribute heat
- Oven and appliance thermal management
- Industrial equipment heat protection
- Precision die-cut components for thermal management assemblies
Compatible Materials
Depending on surface condition and application requirements, 3M™ 433L may be suitable for bonding to:
- Aluminum and compatible metal surfaces
- Aluminum foil
- Suitable foil-faced thermal insulation materials
- Selected heating equipment components
- Compatible insulation facings and industrial substrates
- Surfaces requiring localized thermal shielding
Adhesion depends on surface cleanliness, surface finish, temperature, and application conditions. Test compatibility before production use, especially on coated, contaminated, or irregular substrates.
Industries
- Industrial equipment manufacturing
- Aerospace applications requiring suitable flame-resistant materials
- Appliance and oven manufacturing
- Metal processing and annealing
- Thermal insulation and heat management
- Electrical equipment manufacturing
- Industrial maintenance and repair
- Precision die-cutting and industrial converting
Application suitability must be verified against relevant engineering, safety, and regulatory requirements.
Why Choose 3M™ 433L?
3M™ 433L combines a conformable aluminum foil backing with a silicone pressure-sensitive adhesive to support selected high-temperature thermal management applications. Its easy-release PET liner distinguishes it from the unlined 3M™ 433 and makes it particularly useful for precision die-cutting and converting.
The tape is designed for applications such as heat shielding, insulation wrapping, sealing, and foil splicing where high-temperature performance and accurate placement are important.
Yousan can assist with evaluating converting requirements, including custom widths, slit rolls, and die-cut shapes, subject to product availability, tooling feasibility, and application specifications.
Installation Guide
- Prepare the surface: Ensure the surface is clean, dry, and free from oil, dust, grease, and other contaminants.
- Check application temperature: 3M indicates that best results are obtained when applying to a clean surface above 0°C. The tape can be applied within a stated range of -18°C to 93°C.
- Measure and cut: Cut the tape to the required length or prepare the appropriate die-cut shape.
- Position the tape: Remove the PET release liner and carefully place the adhesive side onto the target surface.
- Apply even pressure: Press the tape down to establish close contact and minimize wrinkles or trapped air.
- Inspect the bond: Check edges and overlaps to ensure proper placement and coverage.
- Validate performance: Test the assembly under actual operating temperatures and exposure durations before full-scale use.
Storage
- Store in the original packaging in a clean, dry environment.
- Protect the tape from direct sunlight, excessive heat, moisture, and contamination.
- Avoid crushing, bending, or deforming the rolls and die-cut parts.
- Keep the release liner intact until the tape is ready for application.
- Follow the shelf-life and storage recommendations in the current 3M product documentation.
FAQ
1. What is 3M™ 433L aluminum foil tape used for?
It is used for selected high-temperature heat shielding, thermal insulation wrapping, sealing, seaming, and splicing applications. Its liner also makes it suitable for precision die-cutting.
2. What is the maximum temperature resistance of 3M 433L?
3M lists limited high-temperature exposure up to 316°C (600°F) for specified applications. The removable-application temperature range is listed as -54°C to 190°C. These figures describe different conditions and should not be treated as interchangeable guarantees for continuous service.
3. What is the difference between 3M 433 and 3M 433L?
The key difference is the liner. 3M 433L includes an easy-release PET film liner, whereas standard 3M 433 is supplied without a liner. The liner on 433L supports handling and precision die-cutting.
4. What type of adhesive does 3M 433L use?
It uses a clear silicone pressure-sensitive adhesive designed for selected high-temperature applications.
5. What is the total thickness of 3M 433L?
The typical total tape thickness is 0.09 mm (3.6 mil), including the adhesive and aluminum foil backing but excluding the release liner. The aluminum foil backing itself is approximately 0.05 mm (2 mil).
6. Can 3M 433L be die-cut into custom shapes?
Yes. The easy-release liner makes it suitable for converting into custom sizes and shapes, subject to the requirements of the converting process.
7. Is 3M 433L flame-resistant?
3M product literature states that it meets the requirements of FAR 25.853(a). Verify the current technical documentation and applicable regulatory requirements for the intended application.
8. Can 3M 433L be used on curved or uneven surfaces?
Its dead-soft aluminum foil backing is conformable and can accommodate curved or uneven surfaces. Actual bonding performance depends on surface condition and application geometry.
9. Does 3M 433L provide thermal insulation?
The aluminum foil tape is primarily used for heat shielding, covering, sealing, and heat distribution. It is not a substitute for bulk thermal insulation; use it as part of an appropriately designed insulation assembly where required.
10. Can 3M 433L be removed without leaving residue?
Residue-free removal is not guaranteed. High-temperature exposure can cause the silicone adhesive to thermoset, changing its properties. Test removal on the actual substrate after the expected temperature exposure and dwell time.
Downloads
Available upon request:
- 3M 433L Aluminum Foil Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.







