Benefits
- Provides aggressive slip resistance for demanding industrial environments
- Helps maintain traction where water, oil, dirt or debris may be present
- Open abrasive construction can reduce clogging and cleaning requirements
- Suitable for heavy-duty pedestrian and industrial applications
- Durable construction supports long-term use in demanding areas
- Available in tape and pre-cut tread formats
- Can be supplied in custom shapes and sizes for specific equipment or floor layouts
Technical Specifications
| Property | 3M™ Safety-Walk™ 710 |
|---|---|
| Product Series | Coarse 700 Series |
| Product Number | 710 |
| Color | Black |
| Anti-Slip Material | Mineral |
| Surface Type | Coarse abrasive |
| Adhesive | Pressure-sensitive adhesive (PSA) |
| Applied Weight | 1,680 g/m² |
| Applied Thickness | Approx. 1.27 mm |
| Minimum Application Temperature | 10°C |
| Minimum Service Temperature | -40°C |
| Maximum Service Temperature | 79°C |
| Slip Resistance | DIN 51130: R13 / V8 |
| Chemical Resistance | Resists most chemicals* |
| Traffic Level | Extreme / heavy traffic |
*Always confirm suitability for the specific chemical and application environment. The current 3M TDS lists 1,680 g/m², 10°C minimum application temperature and 79°C maximum service temperature for the 700 Series; the 3M Selection Guide specifies approximately 1.27 mm applied thickness, -40°C minimum service temperature and R13/V8 slip resistance for 710.
Applications
3M™ Safety-Walk™ 710 is suitable for demanding applications including:
- Construction vehicles
- Ship decks
- Aircraft decks
- Train platforms and access areas
- Semi-trailers
- Machine shops
- Oily and wet industrial areas
- Platforms and ramps
- Loading areas
- Agricultural equipment
- Forestry equipment
- Recreational vehicles
- Heavy-duty machinery
- Industrial access areas
- Equipment steps and footplates
Compatible Materials
3M™ Safety-Walk™ 710 is designed to bond to most suitable, properly prepared surfaces. Typical substrates may include:
- Steel
- Stainless steel
- Aluminum
- Painted metal
- Industrial machinery surfaces
- Metal platforms
- Vehicle decks
- Other smooth, clean and structurally sound substrates
For rough, porous, contaminated or otherwise difficult surfaces, appropriate surface preparation and testing are recommended before full-scale installation. 3M describes the adhesive as providing an excellent bond to most surfaces.
Industries
- Manufacturing
- Automotive
- Construction
- Transportation
- Rail
- Aerospace
- Marine
- Agriculture
- Forestry
- Warehousing & Logistics
- Machinery & Equipment
- Mining & Heavy Industry
- Recreational Vehicles
- Facility Management
Why Choose
3M™ Safety-Walk™ 710 is one of the more aggressive anti-slip solutions in the Safety-Walk™ range. Compared with General Purpose 600 Series products such as 610 and 630, the 710 belongs to the Coarse 700 Series and uses extra-large abrasive mineral particles for extreme and heavy-traffic environments.
Its open abrasive pattern is particularly useful in dirty, wet and oily environments, where smaller or more closed abrasive surfaces may become clogged. 3M specifically lists construction vehicles, ship and aircraft decks, trains, semi-trailers, machine shops and agricultural/forestry equipment among its applications.
Installation Guide
- Prepare the surface – Remove oil, grease, dirt, dust, wax, loose paint and other contaminants.
- Clean and dry – The bonding surface must be clean and dry before application.
- Measure and cut – Cut the tape to the required dimensions and shape.
- Round the corners – Rounded corners can help minimize edge lifting.
- Position the tape – Align the material carefully before applying final pressure.
- Apply pressure – Use a suitable hand roller to apply firm, uniform pressure across the entire surface.
- Inspect the edges – Check that all edges are firmly bonded.
- Allow adequate bonding time – Avoid unnecessary traffic immediately after installation.
Current 3M configurations use Controltac™ Film Technology to facilitate repositioning before final adhesion and Comply™ Adhesive Technology to provide air-release channels for a smoother, bubble-reduced application.
Storage
- Store in the original packaging.
- Keep in a clean and dry area.
- Protect from direct sunlight.
- Recommended storage conditions in the current 3M Safety-Walk product bulletin are 4°C to 38°C with 40%–60% relative humidity.
- The stated maximum shelf life is 5 years from the date of manufacture on the original box, subject to the conditions and limitations specified by 3M.
FAQ
Q1: What is 3M Safety-Walk 710?
A: 3M™ Safety-Walk™ 710 is a black Coarse 700 Series anti-slip tape with extra-large abrasive mineral particles for extreme and heavy-traffic applications.
Q2: Is 3M 710 suitable for oily or wet areas?
A: Yes. Its coarse abrasive construction is specifically designed to provide a stable slip-resistant surface even in the presence of water or oil.
Q3: What is the difference between 3M 710 and 610?
A: 710 belongs to the Coarse 700 Series and uses extra-large abrasive particles for extreme/heavy-duty conditions, while 610 belongs to the General Purpose 600 Series and is intended for general light-to-heavy shoe traffic.
Q4: Can 3M 710 be used outdoors?
A: It can be used in suitable outdoor industrial applications, including construction vehicles, ship decks, trailers and agricultural equipment. The actual substrate and environmental conditions should be evaluated before installation.
Q5: What is the service temperature range of 3M 710?
A: The current 3M technical data lists a minimum service temperature of -40°C and maximum service temperature of 79°C for the 700 Series.
Q6: What is the minimum application temperature?
A: The current 3M TDS specifies 10°C for the 700 Series.
Q7: Can 3M Safety-Walk 710 be custom die-cut?
A: Yes. 3M states that custom shapes and sizes are available. This makes the material suitable for custom treads, equipment footplates and other application-specific formats.
Q8: Can 3M 710 be used on machinery and vehicles?
A: Yes. 3M specifically lists construction vehicles, machine shops, agricultural and forestry equipment, recreational vehicles and other heavy-duty applications.
Downloads
Available upon request:
- 3M 710 Anti Slip Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Adhesive Tape Selection Guide
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.
