Benefits
High Initial Tack
3M™ Adhesive 375 provides high initial tack, helping establish a strong bond shortly after application. This makes 9087 suitable for assembly processes where quick handling and immediate adhesion are important.
Strong Peel and Shear Performance
9087 is designed to provide high levels of peel and shear performance for long-term bonding applications.
Excellent Rough-Surface Bonding
The relatively thick adhesive system helps provide good contact with smooth, rough and textured surfaces, making 9087 more versatile than many thin double-coated film tapes.
Broad Substrate Compatibility
The adhesive system is designed to bond both high- and low-surface-energy substrates, providing flexibility across different industrial materials.
Easy Handling
The PVC carrier provides dimensional stability and makes the tape easier to handle during converting, positioning and assembly.
Environmental Resistance
3M identifies 9087 as offering resistance to UV light, solvents and plasticizers, supporting use in demanding industrial environments.
Long-Term Bonding
The combination of 3M Adhesive 375 and PVC carrier provides a durable solution for applications requiring long-term attachment.
Technical Specifications
| Property | 3M™ High Performance Double Coated Tape 9087 |
|---|---|
| Product Type | Double-sided PVC tape |
| Product Family | 3M™ High Performance Double Coated Tapes |
| Adhesive | 3M™ Adhesive 375 |
| Adhesive Type | Modified acrylic |
| Carrier | PVC |
| Carrier Thickness | 0.038 mm / 1.5 mil |
| Color | White |
| Total Tape Thickness | 0.26 mm / 10.2 mil |
| Liner | Paper / Glassine |
| Liner Thickness | 0.07 mm / 3 mil |
| Adhesive Sides | Double-sided |
| Bond Type | Pressure-sensitive adhesive |
| Primary Characteristics | High tack, high peel, high shear |
| Surface Compatibility | Smooth, rough and textured surfaces |
The above physical properties are typical values from the current 3M technical data sheet and should not be treated as product specifications.
Representative Performance
According to the current 3M TDS, representative 180° peel adhesion after 72 hours at 23°C includes:
| Substrate | Representative Peel Adhesion |
|---|---|
| ABS | 16 N/cm |
| Glass | 18 N/cm |
| HDPE | 9 N/cm |
| High-Pressure Laminate | 13 N/cm |
| Polycarbonate | 16 N/cm |
| Stainless Steel | 16 N/cm |
Representative static shear performance is listed at 10,000 minutes at 23°C under a 1,000 g load, with the test also reaching 10,000 minutes at 70°C under the specified test conditions. These values are representative test results, not guaranteed specifications.
Applications
3M™ High Performance Double Coated Tape 9087 is suitable for a wide range of industrial applications, including:
- POP display assembly
- Plastic extrusion bonding
- Metal fabrication
- Furniture trim attachment
- Blister packs and packaging
- Window blind manufacturing
- Print finishing
- Decorative trim
- Nameplate and badge attachment
- Sign and display assembly
- Plastic component assembly
- Panel bonding
- General industrial assembly
- Laminating
- Splicing
- Die-cut tape components
3M specifically identifies POP displays, plastic extrusions, metal fabrication, blister packs and packaging, blind manufacturing, print finishing and furniture trim as recommended applications.
Compatible Materials
3M™ High Performance Double Coated Tape 9087 can be used with a wide variety of suitable substrates, including:
- Stainless steel
- Aluminum
- Steel
- Glass
- ABS
- Polycarbonate (PC)
- High-density polyethylene (HDPE)
- High-pressure laminate
- Plastics
- Painted surfaces
- Furniture materials
- Plastic extrusions
- Metal components
- Decorative materials
- Other smooth, rough or textured surfaces
3M’s representative performance testing includes ABS, glass, HDPE, high-pressure laminate, polycarbonate and stainless steel. Actual adhesion depends on the substrate, surface preparation, contact area, environmental conditions and application design.
For low-surface-energy materials such as PP and PE, application-specific testing is recommended even though the 375 adhesive system is designed for both high- and low-surface-energy substrates.
Industries
- Printing and converting
- Packaging
- Signage and displays
- POP/POS displays
- Furniture manufacturing
- Window blind manufacturing
- Metal fabrication
- Plastics manufacturing
- Electronics
- Appliances
- General industrial manufacturing
- Consumer products
- Building and interior products
Why Choose 3M™ High Performance Double Coated Tape 9087?
3M™ High Performance Double Coated Tape 9087 is a strong choice when you need a thicker, high-tack double-sided PVC tape for bonding smooth, rough or textured surfaces.
Key advantages include:
- 0.26 mm thick construction
- Stable PVC carrier
- 3M™ Adhesive 375
- High initial tack
- Strong peel and shear performance
- Broad substrate compatibility
- Excellent contact with rough and textured surfaces
- UV, solvent and plasticizer resistance
- Suitable for long-term industrial bonding
- Easy handling and converting
- Suitable for slitting and die-cutting
- Proven 3M industrial adhesive technology
For OEMs, manufacturers and tape converters, 9087 can also be converted into custom-width rolls, strips, pads and precision die-cut components.
Installation Guide
1. Clean the Surface
Remove dust, dirt, oil, grease, moisture and other contaminants from the bonding surfaces.
For optimum adhesion, surfaces should be clean and dry.
2. Evaluate the Substrate
Confirm that the substrate is compatible with acrylic pressure-sensitive adhesive.
For painted, coated, rough, textured or low-surface-energy materials, conduct application-specific testing.
3. Apply the Tape
Apply 9087 smoothly to the first substrate.
Avoid stretching, folding or wrinkling the tape during application.
4. Apply Firm Pressure
Apply sufficient and uniform pressure across the tape to maximize adhesive contact and wet-out.
Pressure is particularly important when bonding textured or irregular surfaces.
5. Remove the Liner
Carefully remove the glassine liner without contaminating the exposed adhesive.
6. Assemble the Components
Position the second component accurately and bring it into contact with the exposed adhesive.
7. Allow Bond Development
Although 9087 has high initial tack, adhesive performance develops over time. Avoid excessive loading immediately after assembly unless the application has been validated.
8. Validate the Finished Assembly
For critical applications, evaluate the complete assembly under actual temperature, humidity, load, vibration, UV, solvent and aging conditions.
Storage
Store 3M™ High Performance Double Coated Tape 9087 in its original packaging in a clean and dry environment.
Recommended storage practices:
- Keep the tape in its original packaging.
- Protect from direct sunlight.
- Avoid excessive heat and humidity.
- Protect adhesive surfaces from dust and contamination.
- Avoid crushing or deforming rolls.
- Prevent damage to roll edges.
- Follow the latest applicable 3M storage and shelf-life recommendations.
Always refer to the latest 3M documentation for the specific commercial configuration being supplied.
FAQ
What is 3M 9087 tape?
3M™ High Performance Double Coated Tape 9087 is a 0.26 mm white double-sided PVC tape using 3M™ Adhesive 375 for high initial tack, strong peel adhesion and shear performance.
What is the carrier of 3M 9087?
The carrier is PVC (polyvinyl chloride) with a typical carrier thickness of 0.038 mm.
What adhesive does 9087 use?
3M 9087 uses 3M™ Adhesive 375, a modified acrylic pressure-sensitive adhesive designed for high initial tack and strong peel and shear performance.
How thick is 3M 9087?
The total tape thickness without liner is 0.26 mm / 10.2 mil.
Is 3M 9087 double-sided?
Yes. The acrylic adhesive is coated on both sides of the PVC carrier.
What color is 9087?
3M™ High Performance Double Coated Tape 9087 is white.
Can 9087 bond rough surfaces?
Yes. 3M specifically describes 9087 as suitable for smooth, rough and textured surfaces. Its relatively thick adhesive system helps establish contact with irregular surfaces.
Can 9087 bond low-surface-energy plastics?
9087 is designed to provide good adhesion to both high- and low-surface-energy substrates. However, actual performance varies by plastic type and surface condition, so testing is recommended before production use.
Is 9087 suitable for HDPE?
Yes. The current 3M TDS reports representative 180° peel adhesion of 9 N/cm on HDPE under the specified test conditions.
Is 9087 suitable for polycarbonate?
Yes. The current TDS reports representative 180° peel adhesion of 16 N/cm on polycarbonate under the specified test conditions.
Is 9087 resistant to UV and solvents?
3M identifies 9087 as offering resistance to UV light, solvents and plasticizers. Actual environmental durability depends on the complete application and should be validated under service conditions.
What is the liner of 9087?
9087 uses a paper/glassine liner, with a typical liner thickness of 0.07 mm.
What are common applications for 9087?
Common applications include POP displays, plastic extrusions, metal fabrication, blister packs and packaging, window blinds, print finishing and furniture trim.
Can 9087 be used for furniture trim?
Yes. Furniture trim is one of the applications specifically listed by 3M for 9087.
Can 9087 be die-cut?
Yes. The PVC carrier provides good dimensional stability for converting operations, and 9087 can be slit or converted into custom shapes depending on the application and converting equipment.
What is the difference between 3M 9086 and 9087?
The primary difference is the carrier:
- 9086: Tissue carrier, 0.19 mm total thickness
- 9087: PVC carrier, 0.26 mm total thickness
Both use 3M™ Adhesive 375 and are designed for high initial tack and strong peel/shear performance. 9087 provides a more dimensionally stable PVC carrier and is particularly useful where easy handling and bonding to rough or textured surfaces are important.
Should 9087 be classified as a Double Coated PVC Tape?
Yes. Because its carrier is PVC, 9087 should be placed under 3M Double Coated PVC Tapes rather than 3M Double Coated Tissue Tapes. 3M itself currently describes 9087 as a double-coated PVC tape.
Downloads
Available upon request:
- 3M 9087 Double Coated Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Adhesive Tape Selection Guide
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.
