Benefits
-
Simplifies bonding without mechanical fasteners.
-
Provides a thin adhesive layer for compact product designs.
-
Supports consistent processing during converting and assembly.
-
Helps attach compatible foam, film, and plastic components.
-
Offers flexibility for customized industrial adhesive solutions.
-
Can improve assembly efficiency when the tape is matched to the substrate and operating conditions.
Technical Specifications
|
Property |
Specification |
|---|---|
|
Brand |
3M™ |
|
Model |
444 |
|
Product type |
Double-coated polyester film tape |
|
Adhesive |
3M™ Acrylic Adhesive 300 |
|
Carrier |
Polyester (PET) film |
|
Appearance |
Transparent |
|
Total tape thickness, excluding liner |
Approximately 0.10 mm (3.9 mil) |
|
Release liner |
Densified kraft paper |
|
Liner thickness |
Approximately 0.076 mm (3 mil) |
|
Example roll length |
32.9 m (36 yd), depending on SKU |
|
Available widths |
Vary by product configuration and market |
|
Temperature performance |
Depends on exposure duration, substrate, load, and application conditions |
|
Converting options |
Slitting and die-cutting, subject to requirements |
Specifications are typical reference values and may vary by SKU or market. Confirm dimensions, liner details, peel adhesion, temperature limits, and shelf life against the current 3M technical data sheet before publishing guaranteed specifications or issuing quotations.
Applications
-
Foam and gasket component attachment
-
Plastic film bonding and lamination
-
Industrial component assembly
-
Bonding selected plastic and metal parts
-
Material splicing during converting operations
-
Mounting lightweight components
-
Custom die-cut adhesive parts
-
General industrial bonding where a thin double-coated tape is suitable
Compatible Materials
Depending on surface energy, surface condition, and application requirements, 3M 444 may be suitable for bonding:
-
Polyester and other compatible films
-
Selected polyethylene and other plastic surfaces
-
ABS, PVC, and acrylic plastics
-
Metal surfaces
-
Glass
-
Painted and coated surfaces
-
Selected foam materials
-
Paper and coated paper
Actual adhesion varies by substrate formulation, surface treatment, cleanliness, and application conditions. Testing is recommended before production use.
Industries
-
Electronics and electrical equipment
-
Automotive components
-
Appliance manufacturing
-
Foam converting and gasket fabrication
-
General industrial manufacturing
-
Packaging and film converting
-
Signage and display production
-
Consumer products
-
Industrial assembly and component fabrication
Why Choose 3M 444?
3M 444 combines a thin polyester carrier with acrylic pressure-sensitive adhesive to support reliable bonding and dimensional stability. Its double-coated construction makes it a candidate for foam attachment, film lamination, component mounting, and other industrial assembly tasks.
For manufacturers and converters, the tape can be assessed for custom-width rolls and precision die-cut parts. The correct selection should be based on substrate compatibility, required bond strength, operating temperature, and expected service life.
Installation Guide
-
Prepare the surface: Remove dust, oil, moisture, and other contaminants.
-
Check compatibility: Test adhesion on the actual materials, especially plastics, coated surfaces, and foam.
-
Position the tape: Align the tape carefully and avoid wrinkles or trapped air.
-
Apply firm pressure: Ensure uniform contact between the adhesive and the substrate.
-
Remove the liner: Peel off the release liner without contaminating the exposed adhesive.
-
Complete bonding: Align the second substrate and press firmly across the bonded area.
-
Validate performance: Test holding strength and durability under the intended operating conditions.
Storage
-
Keep the tape in its original packaging until use.
-
Store in a clean, dry environment.
-
Protect from direct sunlight, excessive heat, and moisture.
-
Avoid crushing or deforming the rolls.
-
Follow the latest manufacturer documentation for storage conditions and shelf life.
FAQ
1. What is 3M 444 tape?
3M 444 is a double-coated polyester tape featuring acrylic pressure-sensitive adhesive on both sides of a PET film carrier.
2. What is 3M 444 commonly used for?
It can be considered for foam attachment, film bonding, component mounting, material splicing, and industrial assembly applications.
3. How thick is 3M 444?
The referenced total tape thickness is approximately 0.10 mm, excluding the release liner. Confirm the value against the current technical data sheet for the selected SKU.
4. What type of adhesive does 3M 444 use?
It uses 3M Acrylic Adhesive 300.
5. Can 3M 444 bond plastic?
It may bond selected plastics, but performance depends on the specific plastic grade and surface energy. Test the actual substrate before use.
6. Is 3M 444 suitable for foam and gasket applications?
It may be suitable for compatible foam and gasket materials. Consider foam density, surface texture, compression, and service conditions when selecting the tape.
7. Can 3M 444 be converted into custom shapes?
Slitting and die-cutting may be possible, depending on the dimensions, tolerances, and production quantity required.
8. Is 3M 444 removable without residue?
Do not assume residue-free removal. The product is intended for bonding, and removal performance depends on the substrate, dwell time, and environmental conditions.
9. What is the temperature resistance of 3M 444?
Temperature performance must be verified against the current manufacturer documentation and the specific application. Short-term exposure limits should not be treated as continuous operating ratings.
Downloads
Available upon request:
- 3M 444 Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.







