Benefits
-
Helps improve walking safety on stairs, floors, and other potentially slippery surfaces.
-
Provides additional visibility in dark or poorly illuminated areas.
-
Helps users identify steps, edges, and walking routes at night.
-
Reduces slipping risks when applied correctly to suitable surfaces.
-
Offers convenient installation without drilling or complicated tools.
-
Supports bathroom, household, commercial, and industrial safety applications.
-
Combines anti-slip surface protection and photoluminescent identification in one product.
Technical Specifications
| Property | Specification |
|---|---|
| Product Name | Glow-in-the-Dark Anti-Slip Tape |
| Product Type | Self-Adhesive Safety Anti-Slip Tape |
| Surface Material | Abrasive / Textured Surface |
| Surface Finish | Matte, Textured |
| Glow Function | Photoluminescent |
| Backing Material | To Be Confirmed |
| Adhesive Type | Pressure-Sensitive Adhesive (PSA) |
| Color | Glow Green / Yellow-Green / Customized |
| Width | Customized |
| Roll Length | Customized |
| Total Thickness | To Be Confirmed |
| Surface Texture | Anti-Slip Textured Finish |
| Water Resistance | Water-Resistant, Subject to Application Conditions |
| Wear Resistance | Designed for Routine Foot Traffic |
| Application | Stairs, Bathrooms, Floors, Corridors and Safety Marking |
| Packaging | Customized Roll Packaging |
Note: Actual specifications depend on the selected product construction. Glow brightness, afterglow duration, water resistance, abrasion resistance, adhesive strength, and slip resistance should be confirmed through the corresponding technical datasheet and test reports.
Applications
1. Stair Anti-Slip Protection
Applied to stair treads and step edges to improve traction and provide nighttime visual guidance.
2. Bathroom and Shower Areas
Suitable for selected bathroom floors, shower entrances, and other areas exposed to water splashes, provided the substrate and installation conditions are compatible.
3. Indoor Floor Safety
Used on smooth floors, corridors, and walking areas where additional slip resistance is required.
4. Nighttime Safety Marking
Helps identify steps, floor boundaries, passageways, and potential obstacles in low-light environments.
5. Commercial Buildings
Suitable for selected applications in hotels, shopping facilities, public buildings, and residential properties.
6. Industrial Safety Areas
Can be used for visual identification and anti-slip protection in suitable indoor working environments.
7. Emergency Exit and Walkway Guidance
Photoluminescent properties can help provide visual guidance along designated walking routes during low-light conditions. Compliance with applicable emergency marking standards must be independently verified.
Compatible Materials
Glow-in-the-dark anti-slip tape can be applied to suitable clean, dry, smooth, and stable surfaces, including:
-
Ceramic tiles
-
Porcelain tiles
-
Marble and stone surfaces
-
Smooth concrete
-
Painted floors
-
Metal surfaces
-
Stainless steel
-
Glass surfaces
-
Other compatible hard surfaces
Surface compatibility depends on texture, porosity, cleanliness, moisture, and adhesive selection. Rough, dusty, porous, uneven, or continuously wet surfaces may require additional preparation or testing.
Industries
-
Residential and Home Improvement
-
Hospitality and Hotels
-
Commercial Buildings
-
Construction and Building Maintenance
-
Property Management
-
Public Facilities
-
Transportation Facilities
-
Industrial Safety Management
Why Choose Yousan?
Yousan provides adhesive tape sourcing, converting, and customized processing solutions for industrial and commercial applications.
Our capabilities include:
-
Custom adhesive tape slitting and rewinding
-
Customized roll widths and lengths
-
Precision die-cutting
-
Customized tape shapes and dimensions
-
OEM and ODM converting support
-
Product specification evaluation
-
Support for customized safety and anti-slip tape requirements
Whether you need glow-in-the-dark anti-slip tape for stairs, bathroom floors, commercial facilities, or industrial safety marking, Yousan can help evaluate suitable product constructions and customized converting solutions based on your requirements.
Installation Guide
-
Surface Inspection: Check the application surface for cracks, loose coatings, uneven areas, and other defects.
-
Surface Cleaning: Remove dust, grease, soap residue, and other contaminants.
-
Surface Drying: Ensure the surface is completely dry before installation.
-
Measurement: Measure the required installation area and cut the tape to the desired length.
-
Liner Removal: Peel off the release liner gradually without touching the exposed adhesive.
-
Tape Application: Position the tape carefully and apply it smoothly to the target surface.
-
Pressure Application: Press firmly and evenly across the tape to improve adhesive contact.
-
Edge Inspection: Check all edges and corners to ensure proper bonding.
-
Adhesive Setting: Allow the adhesive to establish sufficient bonding before exposing the tape to water or heavy foot traffic, following the manufacturer’s instructions.
For bathroom and shower applications, test adhesion under actual moisture conditions before full installation. Avoid applying the tape to surfaces with standing water, soap residue, or continuous water immersion unless specifically approved for such conditions.
Storage
-
Store in the original packaging.
-
Keep in a cool, dry, and clean environment.
-
Avoid direct sunlight and excessive heat during storage.
-
Protect the photoluminescent surface from contamination.
-
Keep away from solvents and incompatible chemicals.
-
Avoid excessive pressure or deformation of the rolls.
-
Follow the recommended storage conditions and shelf life provided in the product datasheet.
FAQ
1. What is glow-in-the-dark anti-slip tape?
It is a self-adhesive safety tape combining a textured anti-slip surface with photoluminescent material. It helps improve traction and provides visual guidance in dark environments.
2. How does glow-in-the-dark tape work?
Photoluminescent materials absorb energy from natural or artificial light and release the stored energy as visible light after the light source is removed. The brightness and afterglow duration depend on the material and exposure conditions.
3. Does the tape need electricity or batteries?
No. Photoluminescent tape does not require electrical power or batteries. It needs sufficient exposure to a suitable light source to charge its glow effect.
4. Is glow-in-the-dark anti-slip tape waterproof?
Water resistance depends on the backing, adhesive, surface construction, and edge sealing. It can be suitable for applications exposed to normal splashes, but continuous immersion or standing water requires specific product validation.
5. Can this tape be used on bathroom floors?
Yes, it can be evaluated for suitable bathroom floor applications. The surface must be clean, dry, stable, and compatible with the adhesive. Actual wet-area slip resistance should be tested before use.
6. Can it be used on stairs?
Yes. It can be applied to suitable stair treads and step edges to improve traction and nighttime visibility.
7. Does the glow effect last all night?
Afterglow duration depends on the photoluminescent material, charging light intensity, exposure time, and surrounding conditions. Please refer to the product’s afterglow test data for specific performance.
8. Can the tape be cut into custom sizes?
Yes. The tape can be cut into different lengths and shapes for stairs, floor boundaries, and customized safety marking applications.
9. Does the tape leave adhesive residue after removal?
Residue depends on the adhesive type, application duration, substrate, and environmental conditions. Test removal performance on the actual surface before large-scale installation.
10. Is the tape suitable for outdoor use?
Outdoor suitability depends on UV exposure, temperature changes, moisture, and adhesive durability. Confirm the product’s weather-resistance data before selecting it for outdoor applications.
Downloads
Available upon request:
- Glow in the Dark Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Adhesive Tape Selection Guide
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.







