Benefits
-
Reduced friction: Helps materials slide smoothly across covered surfaces.
-
Enhanced durability: The thicker backing offers greater wear resistance than the thinner 5480 version.
-
Easy release: Helps reduce sticking and material buildup on rollers, belts, and plates.
-
Simplified cleaning: The non-stick PTFE surface helps make residue and ink buildup easier to remove.
-
Noise reduction: Can help minimize squeaks, rattles, and friction-related noise between surfaces.
-
Industrial versatility: Suitable for selected high-temperature, low-friction, and surface-protection applications.
Technical Specifications
|
Property |
Typical Specification |
|---|---|
|
Product |
3M™ 5481 PTFE Skived Film Tape |
|
Backing material |
Skived PTFE film |
|
Adhesive type |
Silicone pressure-sensitive adhesive |
|
Color |
Gray |
|
Backing thickness |
0.13 mm (130 μm) |
|
Total tape thickness |
0.17 mm (170 μm) |
|
Adhesion to steel |
35 N/100 mm |
|
Tensile strength |
1,039 N/100 mm |
|
Elongation at break |
290% |
|
Temperature-use range |
-54°C to 260°C |
|
Standard roll length |
32.9 m (36 yd) |
Specifications are typical reference values from 3M’s technical documentation, not guaranteed product specifications. Confirm the current datasheet and exact product configuration before purchase or production use.
Applications
-
Roller wrapping for web-processing equipment
-
Low-friction surfaces on belts and plates
-
Release surfaces for sticky materials and inks
-
High-temperature wire bundling and harnessing
-
Friction reduction between moving components
-
Squeak and rattle reduction in assemblies
-
Temporary chemical shielding and surface protection
-
Mold release for composite bonding processes
-
Industrial equipment requiring durable, non-stick surfaces
Compatible Materials
Potential application surfaces include:
-
Metal rollers and plates
-
Industrial belts and web-handling equipment
-
Selected metal and composite tooling
-
Wire and cable assemblies
-
Machine contact surfaces requiring reduced friction
-
Surfaces where a non-stick release layer is needed
Compatibility depends on the substrate, surface condition, temperature, and chemical exposure. The silicone adhesive can be attacked by commercial organic solvents, so this tape should not be assumed suitable for applications requiring organic-solvent resistance.
Industries
-
Packaging and converting
-
Paper and film processing
-
Automotive manufacturing
-
Electronics and electrical equipment
-
Aerospace
-
Metalworking
-
General industrial manufacturing
-
Composite materials processing
-
Transportation equipment
-
Specialty vehicle manufacturing
Why Choose 3M 5481 PTFE Tape from Yousan?
Yousan New Materials supports industrial adhesive tape sourcing and precision converting for OEM and manufacturing applications.
-
Assistance with selecting suitable PTFE tape for specific operating conditions
-
Custom-width slitting options, subject to material availability
-
Precision die-cutting evaluation for suitable designs
-
Sample evaluation support for industrial applications
-
Solutions for low-friction, non-stick, and release-surface requirements
Contact our team with your required width, roll length, operating temperature, and application details to discuss sourcing and converting options.
Installation Guide
-
Prepare the surface: Clean and dry the surface, removing dust, oil, and other contaminants.
-
Measure and cut: Cut the tape to the required dimensions using suitable tools.
-
Position carefully: Align the tape before bonding to avoid wrinkles and trapped air.
-
Apply even pressure: Press the tape firmly against the surface to establish adhesive contact.
-
Inspect the edges: Check that the tape is properly bonded and that edges are not lifting.
-
Test under operating conditions: Verify adhesion, friction, release performance, and durability before full production use.
For applications above 121°C, consult the manufacturer’s installation guidance. Preheating the application surface may help reduce wrinkling or bubbling under elevated-temperature conditions. Do not exceed the specified temperature-use range.
Storage
-
Store in the original packaging under normal controlled conditions.
-
Recommended storage temperature: 16–27°C.
-
Recommended relative humidity: 40–60%.
-
Keep away from direct sunlight, excessive moisture, and contamination.
-
Follow the shelf-life guidance on the current product documentation and packaging.
FAQ
1. What is 3M 5481 PTFE tape used for?
It is used for low-friction, non-stick, and easy-release applications, including roller wrapping, web processing, wire bundling, and surface protection.
2. What is the difference between 3M 5480 and 3M 5481?
Both use skived PTFE film and silicone adhesive. 3M 5481 has a thicker backing and total tape construction, making it suitable for applications requiring greater durability and longer wear.
3. What adhesive does 3M 5481 use?
It uses a pressure-sensitive silicone adhesive.
4. What is the temperature resistance of 3M 5481?
The published temperature-use range is -54°C to 260°C. Actual performance depends on the application and operating conditions.
5. Is 3M 5481 resistant to chemicals?
Its PTFE backing resists many chemicals. However, the silicone adhesive can be attacked by commercial organic solvents, so compatibility testing is necessary.
6. Can 3M 5481 be used for roller wrapping?
Yes. Roller wrapping for web-processing equipment, belts, and plates is among the manufacturer’s recommended applications.
7. Can 3M 5481 be converted into custom widths or die-cut shapes?
Custom slitting or die-cutting may be possible depending on material availability, dimensions, and application requirements. Provide a drawing or specification for evaluation.
8. Is 3M 5481 currently available?
Availability depends on region, product configuration, and stock. Confirm the current supply status with the manufacturer or an authorized distributor before placing an order.
Downloads
Available upon request:
- 3M 5481 PTFE Film Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.







