< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=26111338921830424&ev=PageView&noscript=1" /> Tesa 50600 High Temperature Polyester Masking Tape | Green PET Silicone Tape, 220°C

Tesa 50600 High Temperature Polyester Masking Tape – Green PET Silicone Tape, 220°C

Overview

Tesa 50600 is a green-translucent high temperature polyester masking tape designed for demanding industrial masking and surface protection applications. It features a polyester (PET) film backing and a silicone adhesive system, providing reliable performance at elevated temperatures. The tape is especially suitable for powder coating processes where clean removal and sharp paint edges are required. With temperature resistance up to 220°C for 30 minutes, tesa 50600 is an effective solution for industrial coating, finishing, and selected bonding and splicing applications involving non-polar materials.

Features

  • Green-translucent polyester (PET) film backing

  • Silicone adhesive for high-temperature performance

  • Withstands temperatures up to 220°C for 30 minutes

  • Clean, one-piece removal under suitable application conditions

  • Helps create sharp, well-defined paint edges

  • Good paint anchorage

  • Available in a version with a 50 μm PET release liner (tesa 50600 PV1)

  • Total tape thickness: 80 μm


Benefits

  • High-temperature resistance: Suitable for specified industrial heating and powder coating processes.

  • Clean removal: Helps reduce adhesive residue after masking when used under appropriate conditions.

  • Precise masking: Supports clean coating boundaries and helps prevent paint from spreading into protected areas.

  • Easy application: The flexible polyester film is convenient for industrial masking operations.

  • Versatile use: Suitable for selected surface protection and bonding or splicing applications involving non-polar materials.

Technical Specifications

Parameter Specification
Product Model Tesa 50600
Product Type High Temperature Polyester Masking Tape
Backing Material PET (Polyester Film)
Adhesive Type Silicone
Color Green-translucent
Total Thickness 80 μm
Temperature Resistance Up to 220°C for 30 minutes
Tensile Strength 75 N/cm
Elongation at Break 110%
Adhesion to Steel 4 N/cm
Dielectric Breakdown Voltage 4,000 V
Release Liner Option 50 μm PET liner version available as tesa 50600 PV1

Note: The figures above are typical values from manufacturer documentation, not guaranteed specifications. Confirm the exact product version and processing conditions before use.

Applications

  • Powder coating masking

  • High-temperature industrial painting and coating

  • Masking areas that must remain uncoated

  • Surface protection during selected manufacturing processes

  • Bonding and splicing of non-polar materials, where compatibility has been confirmed

  • Industrial finishing and component processing

Compatible Materials

Potential applications include:

  • Metal components used in powder coating

  • Painted and coated surfaces requiring masking

  • Selected non-polar plastics for bonding or splicing applications

  • Industrial parts requiring temporary surface protection

Adhesion depends on the substrate surface, cleanliness, texture, temperature, and process conditions. Test compatibility before production use.

Industries

  • Powder Coating and Industrial Painting

  • Automotive Parts Manufacturing

  • Metal Fabrication

  • Electrical and Electronic Component Manufacturing

  • Appliance Manufacturing

  • Industrial Equipment Manufacturing

Why Choose tesa 50600?

tesa 50600 combines a polyester film backing with a silicone adhesive to deliver high-temperature masking performance for industrial coating processes. Its clean-removal characteristics and ability to create sharp paint edges make it a practical choice for applications where masking precision and process efficiency are important.

For OEM manufacturing and industrial converting projects, confirm the required roll width, length, release-liner version, operating temperature, and removal conditions before selecting the final specification.

Installation Guide

  1. Prepare the surface: Ensure the application surface is clean, dry, and free from oil, dust, and other contaminants.

  2. Select the correct version: Determine whether the standard tape or the PET-liner version (50600 PV1) is required.

  3. Apply the tape: Press the tape firmly onto the intended masking area and ensure the edges are properly bonded.

  4. Check the masking boundary: Confirm that the tape edges are secure before coating or heating.

  5. Follow process limits: Do not exceed the specified temperature resistance of 220°C for 30 minutes.

  6. Remove carefully: After processing, peel the tape back steadily under validated removal conditions.

  7. Validate first: Test the tape on the actual substrate and under the intended process conditions before full-scale production.

Storage

  • Store in the original packaging in a clean, dry environment.

  • Protect the tape from direct sunlight, excessive heat, moisture, and dust.

  • Keep rolls away from contaminants and physical damage.

  • Follow the manufacturer’s current storage and shelf-life guidance for the supplied product version.

FAQ

1. What is tesa 50600 used for?

It is primarily used for masking areas that must remain uncoated during powder coating. It can also be used for selected surface protection and bonding or splicing applications involving non-polar materials.

2. What is the maximum temperature resistance of tesa 50600?

The manufacturer specifies resistance up to 220°C for 30 minutes. Actual performance depends on the process conditions and should be validated for the intended application.

3. What material is tesa 50600 made from?

It uses a PET polyester film backing with a silicone adhesive.

4. Does tesa 50600 leave adhesive residue?

It is designed for clean, one-piece removal and residue-free performance under suitable conditions. Results can vary with substrate, dwell time, temperature, and surface condition.

5. Is tesa 50600 suitable for powder coating?

Yes. Masking areas that must remain uncoated during powder coating is its principal application.

6. Is tesa 50600 available with a release liner?

Yes. A version with a 50 μm PET release liner is available as tesa 50600 PV1. Confirm availability and the exact specification with the supplier.

7. Can tesa 50600 be die-cut?

Die-cutting suitability should be confirmed with the converter based on the required shape, liner version, and processing method. Do not assume all versions are suitable without testing.

8. Can tesa 50600 be used on plastic?

It may be suitable for selected non-polar materials in bonding or splicing applications. Test adhesion and removability on the actual plastic before use.


Downloads

Available upon request:

Please contact our sales team if you require the latest technical documentation.

Scroll to Top