Benefits
-
High-temperature process performance: Suitable for selected soldering, reflow, and other elevated-temperature manufacturing processes.
-
Reduced silicone contamination risk: The non-silicone adhesive is useful for applications where silicone residue is undesirable.
-
Clean removal: Helps protect residue-sensitive surfaces and reduce post-process cleaning.
-
Surface protection: Polyimide backing provides a dimensionally stable masking layer.
-
Thin construction: Helps minimize added thickness around small electronic components.
-
Converting flexibility: Can be evaluated for custom-width slitting and precision die-cutting to meet manufacturing requirements.
Technical Specifications
| Property | Typical specification |
|---|---|
| Product | 3M™ 7414 Polyimide Film Tape |
| Backing material | Polyimide film |
| Adhesive type | Acrylic pressure-sensitive adhesive |
| Silicone content in adhesive system | Non-silicone adhesive |
| Color | Amber |
| Backing thickness | 0.025 mm |
| Total tape thickness | Approximately 0.047 mm |
| Standard roll length | 33 m (36 yd) |
| Heat resistance | 260°C for 30 minutes |
| Adhesion | Refer to the applicable regional technical data sheet |
| Release liner | No liner on standard 7414; linered variants are available under separate product designations |
Important: The 260°C figure describes specific process/test conditions, not a continuous operating-temperature rating. Typical values may vary by region and test method. Verify the latest 3M technical data sheet before using these figures as purchasing specifications.
Applications
-
PCB solder reflow masking
-
Printed circuit board component protection
-
Temporary component holding during high-temperature processing
-
Masking of residue-sensitive electronic surfaces
-
Protection of gold-plated areas and suitable electronic packaging substrates
-
Sensor package protection
-
Leadframe masking in suitable manufacturing processes
-
Temporary bonding and positioning during electronics assembly
-
High-temperature masking in precision manufacturing
-
Custom die-cut protective pieces for electronic components
Compatible Materials
Potential substrates and surfaces include:
-
Printed circuit board materials, including suitable FR-4 surfaces
-
Polyimide films and components
-
Gold-plated electronic contact areas
-
Selected metals and metal components
-
Suitable plastic components used in electronics manufacturing
-
Electronic packaging and sensor surfaces
Compatibility depends on surface finish, process temperature, exposure time, and removal conditions. Conduct application-specific testing before production use.
Industries
-
Electronics manufacturing
-
Printed circuit board assembly
-
Semiconductor and electronic packaging
-
Sensor manufacturing
-
Precision electronic component manufacturing
-
Automotive electronics
-
Industrial electrical equipment
-
High-temperature process manufacturing
Why Choose 3M 7414 Polyimide Tape?
3M 7414 is designed for applications where high-temperature masking and clean removal are important. Its polyimide film backing provides a thin, stable masking layer, while its non-silicone acrylic adhesive helps address processes sensitive to silicone contamination.
For manufacturers seeking tape in custom widths or die-cut formats, Yousan can evaluate converting options based on the required dimensions, quantity, and process conditions.
The suitability of 3M 7414 should be confirmed against the actual temperature profile, substrate, and cleanliness requirements of the application.
Installation Guide
-
Prepare the surface: Ensure the substrate is clean, dry, and free from oil, dust, and loose particles.
-
Confirm process compatibility: Check the actual temperature, exposure duration, substrate, and removal requirements.
-
Apply the tape: Position the tape carefully without excessive stretching, wrinkles, or trapped air.
-
Press into contact: Apply uniform pressure to ensure adequate contact with the surface.
-
Process and remove: Follow the validated manufacturing process and allow the assembly to cool as required before removal.
-
Inspect the surface: Check for adhesive residue, staining, or surface damage after removal.
Always validate the tape under the actual production conditions before full-scale implementation.
Storage
-
Store in the original packaging in a clean, dry environment.
-
Avoid direct sunlight, excessive heat, moisture, and dust.
-
Keep the adhesive surface free from contamination before use.
-
Follow the storage temperature, humidity, and shelf-life guidance in the current manufacturer documentation.
-
Use the product within its stated shelf life.
FAQ
1. What is 3M 7414 polyimide tape used for?
It is designed for high-temperature masking, temporary bonding, component protection, and selected PCB soldering and reflow applications.
2. What adhesive does 3M 7414 use?
It uses a specially designed acrylic pressure-sensitive adhesive rather than a silicone pressure-sensitive adhesive.
3. What is the total thickness of 3M 7414?
The nominal total thickness is approximately 0.047 mm, including a 0.025 mm polyimide backing.
4. Can 3M 7414 withstand 260°C?
3M regional literature describes performance at 260°C for 30 minutes under specified test conditions. This should not be interpreted as a continuous operating-temperature rating. Validate the tape against the actual process profile.
5. Does 3M 7414 leave silicone residue?
Its adhesive is non-silicone, which helps avoid silicone-related contamination. Actual residue performance depends on the substrate and process conditions.
6. Is 3M 7414 suitable for PCB reflow soldering?
Yes. It is designed for selected high-temperature masking and protection applications, including PCB soldering and reflow processes.
7. What is the difference between 3M 7414 and 3M 7414L?
Standard 3M 7414 does not have a release liner. The 7414L version includes a liner, which can improve handling and converting for applications that require it.
8. Can 3M 7414 be die-cut into custom shapes?
The tape can be evaluated for precision converting and die-cutting. Feasibility depends on the geometry, dimensional tolerance, liner requirements, and order quantity.
Downloads
Available upon request:
- 3M 7414 Polyimide Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.







