Benefits
-
Provides reliable bonding for many foam lamination applications.
-
Helps maintain dimensional stability during high-volume converting processes.
-
Supports precise handling when laminating thin or flexible materials.
-
Offers good initial adhesion for efficient assembly operations.
-
Helps simplify foam-to-substrate bonding in automotive and industrial applications.
-
Suitable for custom adhesive components, foam gaskets, and die-cut parts.
Technical Specifications
| Property | Specification |
|---|---|
| Product Name | 3M™ L1+DCP |
| Product Type | Double Coated Polyester Tape |
| Adhesive Type | Modified Acrylic |
| Carrier Material | Polyester (PET) |
| Carrier Thickness | 0.50 mil (0.013 mm) |
| Adhesive Thickness | 1.5 mil per side (nominal) |
| Total Tape Thickness | 3.5 mil (0.088–0.09 mm) |
| Release Liner | White 74 lb Densified Kraft (DK) |
| Liner Thickness | Approx. 4.1 mil (0.103 mm) |
| Color | Transparent tape with white release liner |
| Temperature Resistance | Up to 200°F (93°C) |
| Recommended Substrates | PU foam, cross-linked PE foam, microcellular urethane foam |
| Converting Methods | Laminating, slitting, die-cutting |
Note: Values are typical technical data, not specification limits. Actual performance depends on substrate, application conditions, and product configuration. Refer to the latest 3M Technical Data Sheet for complete details.
Applications
-
Foam Lamination: Bonding open-cell and closed-cell foam materials to other substrates.
-
Automotive Interior Bonding: Attaching foam components used in automotive interior assemblies.
-
Gasket Manufacturing: Laminating adhesive to foam materials for gasket and sealing component production.
-
Die-Cut Foam Parts: Manufacturing custom adhesive-backed foam components.
-
Large-Area Lamination: Bonding foam sheets and flexible materials over larger surface areas.
-
Industrial Assembly: Attaching foam insulation, cushioning, and other flexible components.
Compatible Materials
3M L1+DCP is designed to bond well to the following materials:
-
Polyurethane (PU) foam
-
PU ether foam
-
PU ester foam
-
Cross-linked polyethylene (PE) foam
-
Microcellular urethane foam
-
Selected open-cell and closed-cell foam materials
Additional substrates may require testing to confirm adhesion compatibility.
Industries
-
Automotive Manufacturing
-
Automotive Interior Components
-
Foam Converting and Fabrication
-
Industrial Manufacturing
-
Appliance Manufacturing
-
Electronics and Electrical Equipment
-
Gasket and Sealing Products
-
Insulation and Cushioning Products
Why Choose 3M™ L1+DCP Tape?
-
3M Adhesive Technology: Uses the L1 modified acrylic adhesive platform for foam bonding applications.
-
PET Carrier Stability: Provides improved dimensional stability compared with unsupported adhesive constructions.
-
Foam Bonding Capability: Designed for adhesion to a range of polyurethane and polyethylene foam materials.
-
Converting Efficiency: Suitable for lamination, slitting, and precision die-cutting operations.
-
Custom Converting Support: Yousan can evaluate custom widths, roll formats, foam lamination, and die-cut adhesive components according to project requirements.
Installation Guide
-
Prepare the Surface: Ensure bonding surfaces are clean, dry, and free from dust, oil, and other contaminants.
-
Check Compatibility: Test the tape on the actual foam and mating substrate before full production.
-
Apply the Tape: Laminate the adhesive side onto the selected foam or substrate using suitable pressure.
-
Remove the Release Liner: Peel away the white densified kraft liner to expose the second adhesive surface.
-
Complete Bonding: Position the second substrate carefully and apply firm, even pressure.
-
Allow Adhesion to Develop: Allow sufficient dwell time for the adhesive to establish the required bond strength.
For optimum results, the recommended application temperature is approximately 70°F–100°F (21°C–38°C). Application to surfaces below 50°F (10°C) is not recommended.
Storage
-
Store in the original packaging.
-
Keep in a clean, dry, and well-ventilated environment.
-
Avoid direct sunlight and excessive heat.
-
Maintain recommended storage conditions of approximately 70°F (21°C) and 50% relative humidity.
-
Protect rolls from dust, moisture, and mechanical damage.
Follow the latest 3M technical documentation for shelf-life and storage requirements.
FAQ
Q1: What is 3M L1+DCP tape?
3M L1+DCP is a double-coated polyester tape featuring modified acrylic adhesive on both sides of a PET carrier. It is designed primarily for foam lamination and bonding applications.
Q2: What materials can 3M L1+DCP bond to?
It is designed to bond well to polyurethane foam, cross-linked polyethylene foam, and microcellular urethane foam, including various open-cell and closed-cell foam substrates.
Q3: Does 3M L1+DCP have a PET carrier?
Yes. It features a 0.5 mil PET carrier that provides dimensional stability and improved handling during lamination and die-cutting.
Q4: What is the total thickness of 3M L1+DCP?
Its typical total tape thickness is approximately 3.5 mil (0.088–0.09 mm), excluding the release liner.
Q5: What is the temperature resistance of 3M L1+DCP?
The L1 adhesive platform is designed to withstand temperatures up to 200°F (93°C). Actual performance depends on exposure duration, substrate, and application conditions.
Q6: Is 3M L1+DCP suitable for die-cutting?
Yes. Its PET carrier provides dimensional stability and improved handling, making it suitable for laminating and die-cutting, particularly with thin or flexible substrates.
Q7: Can 3M L1+DCP be converted into custom widths or die-cut shapes?
Yes. Depending on material availability and converting requirements, it can be evaluated for custom slitting, laminating, and precision die-cutting.
Q8: Is 3M L1+DCP suitable for automotive applications?
Yes. Automotive interior bonding and foam component lamination are among its recommended application areas.
Downloads
Available upon request:
- 3M L1+DCP Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Precision Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.






