Benefits
-
Helps prevent unwanted light leakage in electronic devices.
-
Improves light isolation around display and backlight components.
-
Provides reliable bonding to a variety of electronic component materials.
-
Maintains a slim profile for compact electronic assemblies.
-
Supports accurate positioning and precision die-cut adhesive parts.
-
Helps simplify light-blocking and component attachment processes.
-
Suitable for customized roll slitting and die-cutting applications.
Technical Specifications
| Property | Specification |
|---|---|
| Product Name | 3M™ Light Shielding Tape 9632-55 |
| Product Type | Black PET Light Shielding Tape |
| Color | Black |
| Adhesive Type | High-Performance Acrylic |
| Backing Material | PET (Polyester Film) |
| Total Tape Thickness | 0.055 mm (55 μm) |
| Release Liner | PET |
| Release Liner Thickness | 0.038 mm |
| Light Insulation Performance | 99.99% (reported in 3M TDS) |
| Standard Log Roll Size | 1000 mm × 100 m |
| Custom Sizes | Available upon request, subject to supply |
| Converting | Slitting, laminating, precision die-cutting |
Typical Adhesion and Performance Data
| Test Property | Typical Result |
|---|---|
| 180° Peel Adhesion to Stainless Steel, 30 min dwell | 5.0 N/cm |
| 180° Peel Adhesion to Polycarbonate, 30 min dwell | 5.0 N/cm |
| 180° Peel Adhesion to Stainless Steel, 72 hr dwell | 5.5 N/cm |
| 180° Peel Adhesion to Polycarbonate, 72 hr dwell | 5.5 N/cm |
| Static Shear at Room Temperature | 10,000 minutes |
| Static Shear at 70°C | 10,000 minutes |
Note: These are typical values from the September 2014 3M technical data sheet, not guaranteed specification limits. The current regional product configuration should be confirmed before ordering, particularly because the current 3M product page describes the construction as double-sided while the older TDS describes it as single-coated.
Applications
-
LCD Backlight Units (BLU): Light shielding and component bonding in backlight assemblies.
-
Display Modules: Blocking unwanted light around display components.
-
Electronic Devices: Light insulation and component attachment in compact electronic assemblies.
-
Appliance Manufacturing: Bonding and light shielding in household electronic appliances.
-
Electronic Component Fixing: Holding and bonding selected internal components.
-
Precision Die-Cut Parts: Custom light-blocking adhesive shapes for electronic assemblies.
-
Indoor and Outdoor Mounting: General-purpose joining and mounting applications where the product construction is suitable.
Compatible Materials
3M 9632-55 is designed to provide good adhesion to various substrates, including:
-
Polycarbonate (PC)
-
ABS plastics
-
Other suitable engineering plastics
-
Glass
-
Stainless steel
-
Selected metals
-
Painted and coated surfaces, subject to compatibility testing
Actual adhesion depends on surface condition, cleanliness, surface energy, and application conditions.
Industries
-
Consumer Electronics
-
LCD and Display Manufacturing
-
LED and Backlight Manufacturing
-
Electrical and Electronic Equipment
-
Home Appliance Manufacturing
-
Precision Component Manufacturing
-
Industrial Electronics
Why Choose 3M™ 9632-55?
-
Reliable Light Shielding: Designed to provide excellent light insulation for electronic assemblies.
-
Thin PET Construction: A nominal thickness of just 0.055 mm supports compact product designs.
-
Strong Substrate Compatibility: Good adhesion to many plastics, glass, and metal surfaces.
-
Precision Converting: Suitable for custom die-cut shapes and narrow-width slit rolls.
-
Electronic Assembly Applications: Particularly useful for display, backlight, and appliance components.
-
Yousan Converting Support: Guangdong Yousan New Materials can evaluate custom slitting, precision die-cutting, and adhesive component converting according to project requirements.
Installation Guide
-
Surface Preparation: Ensure bonding surfaces are clean, dry, and free from dust, oil, and other contaminants.
-
Check Product Construction: Confirm the adhesive-side configuration and liner removal method for the supplied product.
-
Cut to Size: Use the required roll width or precision die-cut shape.
-
Position the Tape: Align the tape with the area requiring light shielding.
-
Apply Pressure: Press firmly and evenly to establish sufficient adhesive contact.
-
Inspect the Assembly: Check for gaps, wrinkles, and light leakage around the bonded area.
For optimum adhesion, the 3M TDS recommends an application temperature of 21°C–38°C. Initial application below 10°C is not recommended.
Storage
-
Store in the original cartons.
-
Maintain approximately 21°C (70°F) and 50% relative humidity.
-
Keep away from direct sunlight and excessive heat.
-
Protect the tape from dust, moisture, and contamination.
-
Avoid crushing or damaging the roll edges.
-
According to the September 2014 3M TDS, the shelf life is two years from the date of manufacture when stored under the recommended conditions.
FAQ
Q1: What is 3M 9632-55 used for?
3M 9632-55 is a black PET light shielding tape used to block unwanted light and bond components in electronic devices, including LCD backlight units and display modules.
Q2: What is the thickness of 3M 9632-55?
Its nominal total tape thickness is 0.055 mm (55 μm), excluding the release liner.
Q3: How effective is its light shielding performance?
The 3M technical data sheet reports 99.99% light insulation performance.
Q4: What adhesive does 3M 9632-55 use?
The September 2014 TDS identifies a high-performance acrylic adhesive.
Q5: What materials can 3M 9632-55 bond to?
It provides good adhesion to many plastics, glass, and metals, including polycarbonate and stainless steel.
Q6: Is 3M 9632-55 suitable for die-cutting?
Yes. 3M identifies easy converting and die-cutting as important product features. It can be evaluated for custom light-shielding shapes and precision adhesive components.
Q7: Can 3M 9632-55 be used in LCD backlight assemblies?
Yes. Light insulation in electronic devices, including BLU bonding to LCDs and BLU module bonding, is specifically listed in the 3M technical documentation.
Q8: Is 3M 9632-55 single-sided or double-sided?
There is a documentation difference: the September 2014 TDS describes it as single-coated, while the current US 3M product page describes it as double-sided. Confirm the exact construction with 3M or the authorized supplier before specifying the adhesive-side configuration.
Q9: Can it be supplied in custom widths?
The older 3M TDS lists a standard 1000 mm × 100 m log roll and states that custom sizes can be supplied upon request, subject to current availability.
Downloads
Available upon request:
- 3M 9632-55 Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Precision Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.







