Benefits
-
Reliable sealing: Helps seal joints in thermal insulation, ducts, and pipes.
-
Heat reflection: The aluminum surface reflects heat radiation for suitable insulation applications.
-
Durable construction: The mechanically stable foil backing supports demanding industrial handling and permanent bonding.
-
Convenient converting: The paper release liner supports handling, positioning, and die-cutting processes.
-
Easy application: The tape can be torn by hand, helping simplify installation and maintenance.
-
Moisture barrier: Helps protect sealed joints against moisture, gases, and vapors.
-
Versatile performance: Suitable for insulation, HVAC, vehicle repair, and conductive surface applications.
-
Temperature versatility: The published operating temperature range is -40°C to +160°C.
Technical Specifications
| Property | Specification |
|---|---|
| Product Name | Tesa 60672 |
| Product Type | Aluminum foil adhesive tape |
| Backing Material | Aluminum foil |
| Aluminum Foil Thickness | 75 μm (3 mil) |
| Adhesive Type | Transparent acrylic |
| Total Tape Thickness | 125 μm, excluding liner |
| Release Liner Material | White, single-sided siliconized paper |
| Release Liner Thickness | 85 μm |
| Total Thickness Including Liner | 210 μm |
| Adhesion to Steel | 10 N/cm |
| Initial Adhesion to Glass | 10 N/cm |
| Initial Adhesion to PE | 5.5 N/cm |
| Initial Adhesion to PVC | 7 N/cm |
| Adhesion to Backing | 9 N/cm |
| Tensile Strength | 60 N/cm |
| Elongation at Break | 8% |
| Liner Release Force | 0.3 N/cm |
| Operating Temperature Range | -40°C to +160°C |
| Hand Tearability | Very good |
| Water Resistance | Very good |
| Abrasion Resistance | Very good |
| Suitable for Die-Cutting | Yes |
| Flame-Retardant Documentation | DIN 4102 Class B1; UL 510A requirements; meets UL 723 requirements |
Note: These are typical values from tesa product documentation, not guaranteed specifications. Confirm the latest technical data sheet, applicable certifications, and suitability for the intended application before use.
Applications
-
Joining and sealing thermal insulation materials
-
Sealing HVAC ducts and ventilation systems
-
Sealing joints in pipes and insulation assemblies
-
Repairing trucks and trailers
-
Reflecting heat radiation in industrial insulation applications
-
Creating electrically or thermally conductive surfaces
-
Industrial maintenance and repair
-
Die-cut aluminum foil tape components for suitable applications
Compatible Materials
Tesa 60672 may be applied to suitable, clean, dry surfaces, including:
-
Aluminum and other metal surfaces
-
HVAC duct surfaces
-
Thermal insulation materials with compatible surface finishes
-
Suitable plastic substrates, subject to adhesion testing
-
Truck and trailer components
-
Other industrial surfaces compatible with acrylic adhesive
Adhesion depends on the surface energy, texture, cleanliness, and operating environment of the substrate. Always test the tape on the actual materials before production use.
Industries
-
HVAC and ventilation
-
Building and construction
-
Industrial thermal insulation
-
Automotive and commercial vehicles
-
Truck and trailer manufacturing and repair
-
Industrial equipment manufacturing
-
Electrical and thermal management
-
Maintenance, repair, and operations (MRO)
-
Industrial tape converting and die-cutting
Why Choose
Tesa 60672 combines a robust 75 μm aluminum foil backing with a transparent acrylic adhesive and a removable paper release liner. Its 125 μm tape thickness, strong adhesion to steel, thermal and electrical conductivity, and resistance to water and abrasion make it a versatile choice for permanent industrial sealing and insulation applications.
The paper liner also supports handling and converting, making the tape suitable for die-cutting applications where custom shapes or precise dimensions are required.
For businesses sourcing aluminum foil tapes, Yousan can help assess roll dimensions, custom converting requirements, and application suitability based on your technical specifications.
Installation Guide
-
Prepare the surface: Remove dust, oil, grease, moisture, and other contaminants from the bonding area.
-
Check compatibility: Test adhesion on the intended substrate, especially when bonding to plastics or insulation materials.
-
Measure and cut: Cut the tape to the required length or prepare the specified die-cut shape.
-
Remove the liner: Peel away the siliconized paper liner without contaminating the exposed adhesive.
-
Position the tape: Align the tape over the joint, seam, or repair area.
-
Apply firm pressure: Smooth the tape evenly to minimize wrinkles and trapped air.
-
Inspect the bond: Check that the tape edges are secure and the adhesive makes full contact with the surface.
-
Validate performance: Confirm that the application meets the required sealing, temperature, and durability requirements.
Follow the latest manufacturer recommendations for surface preparation, application pressure, and operating conditions.
Storage
-
Store in the original packaging in a clean, dry environment.
-
Protect the tape from direct sunlight, excessive heat, and moisture.
-
Keep the adhesive surface free from dust, oil, and other contaminants.
-
Avoid crushing or deforming the rolls during storage.
-
Follow the manufacturer’s current storage and shelf-life recommendations.
FAQ
1. What is tesa 60672 aluminum foil tape?
tesa 60672 is a robust aluminum foil tape featuring a 75 μm aluminum backing, transparent acrylic adhesive, and a white paper release liner. It is designed for permanent industrial sealing, insulation, and repair applications.
2. What is the total thickness of tesa 60672?
The total tape thickness is 125 μm excluding the release liner. Including the 85 μm paper liner, the overall thickness is 210 μm.
3. Does tesa 60672 have a release liner?
Yes. It features a white, single-sided siliconized paper liner that can be removed before application.
4. What is the operating temperature range of tesa 60672?
The published operating temperature range is -40°C to +160°C. Confirm suitability under the actual operating conditions before use.
5. Is tesa 60672 suitable for HVAC duct sealing?
Yes. The manufacturer lists joining and sealing thermal insulation, ducts, and pipes among its application fields.
6. Can tesa 60672 reflect heat radiation?
Yes. Its aluminum foil backing reflects heat and light radiation, making it suitable for appropriate insulation and heat-reflection applications.
7. Is tesa 60672 electrically and thermally conductive?
Yes. Electrical and thermal conductivity are listed product features. The performance of the complete assembly should be verified for the intended application.
8. Is tesa 60672 flame retardant?
The manufacturer lists flame-retardant properties according to DIN 4102 Class B1 and UL 510A requirements, and states that the product meets UL 723 requirements. Consult the relevant manufacturer certificates and test documents for the applicable scope.
9. Can tesa 60672 be die-cut into custom shapes?
Yes. The manufacturer lists tesa 60672 as suitable for die-cutting. The feasibility of a particular design depends on shape, dimensional tolerance, liner handling, and the converting process.
10. What is the difference between tesa 60670 and tesa 60672?
Both products have a 75 μm aluminum foil backing, acrylic adhesive, 125 μm total tape thickness, and a published operating temperature range of -40°C to +160°C. The key difference is that tesa 60672 includes an 85 μm paper release liner, while tesa 60670 is linerless. tesa 60672 is also listed as suitable for die-cutting, making it worth considering when liner-supported converting is required.
Downloads
Available upon request:
- Tesa 60672 Aluminum Foil Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.






