Benefits
-
Maintains a clear appearance in light-transmitting assemblies.
-
Minimizes adhesive bond-line thickness in compact electronic devices.
-
Supports reliable bonding of transparent films and components.
-
Helps reduce visible adhesive lines in suitable applications.
-
Provides dimensional stability for accurate converting and assembly.
-
Supports clean manufacturing processes for display and electronic components.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | 3M Ultra-Clear Double Coated PET Tape |
| Model | UCT-10 |
| Product Type | Ultra-clear double-coated PET tape |
| Color | Transparent |
| Adhesive Type | Acrylic |
| Adhesive Construction | Double-sided |
| Carrier Material | PET |
| Carrier Thickness | 0.002 mm (0.08 mil) |
| Face-Side Adhesive Thickness | 0.004 mm (0.16 mil) |
| Back-Side Adhesive Thickness | 0.004 mm (0.16 mil) |
| Total Tape Thickness | 0.010 mm (0.39 mil), excluding liners |
| Liner Material | PET |
| Light Transmission | 90% |
| Haze | 1.1% |
| Standard Roll Width | 1,000 mm; width increments of 10 mm |
| Short-Term Temperature Resistance | 177°C (350°F), minutes to hours |
| Long-Term Temperature Resistance | 80°C (185°F), days to weeks |
| Recommended Storage Life | 12 months from date of manufacture under recommended conditions |
Typical 180° Peel Adhesion (ASTM D3330, 23°C):
| Substrate | 20-Minute Dwell | 72-Hour Dwell |
|---|---|---|
| ABS | 3.6 N/cm | 4.3 N/cm |
| Polycarbonate (PC) | 4.6 N/cm | 5.1 N/cm |
| Polypropylene (PP) | 1.0 N/cm | 1.0 N/cm |
| Stainless Steel | 4.4 N/cm | 5.0 N/cm |
Typical Static Shear (ASTM D3654):
-
23°C, 1,000 g: 10,000 minutes (test terminated at 10,000 minutes).
-
70°C, 500 g: 5,000 minutes.
Note: All performance values are typical data from the September 2024 3M Technical Data Sheet and are not guaranteed product specifications. Optical performance and bond strength should be validated under the actual application conditions.
Applications
-
Mobile phone lens attachment.
-
Tablet screen attachment.
-
Display screen assembly.
-
Backlit graphic bonding.
-
Backlit control button bonding.
-
Transparent plastic film lamination.
-
Electronic component assembly.
-
Foam and graphite sheet bonding.
-
Precision bonding applications requiring high light transmission and low haze.
Compatible Materials
Depending on surface condition and application requirements, 3M UCT-10 can be evaluated for bonding:
-
Polycarbonate (PC).
-
ABS plastic.
-
Polypropylene (PP).
-
Stainless steel.
-
Transparent PET films.
-
Other suitable plastic films and components.
-
Foam materials.
-
Graphite sheets.
Adhesion varies by substrate. PP and other low-surface-energy materials may require additional evaluation or surface treatment.
Industries
-
Consumer Electronics
-
Mobile Phone Manufacturing
-
Tablet and Display Manufacturing
-
Touchscreen Assembly
-
Backlit Signage and Graphics
-
Electronic Component Manufacturing
-
Appliance Manufacturing
-
Precision Adhesive Converting
Why Choose 3M UCT-10?
3M UCT-10 combines ultra-thin construction, high light transmission, low haze, and reliable acrylic adhesion in one transparent double-coated tape.
Its transparent PET carrier and PET release liner system support dimensional stability and precision converting, while its clean-room coating process helps minimize contamination during manufacturing.
For manufacturers producing display assemblies, electronic components, or transparent bonded structures, UCT-10 offers a practical solution where optical appearance and precise adhesive placement are essential.
Yousan can evaluate custom slitting, laminating, and precision die-cutting solutions according to your component drawings, dimensions, and production requirements.
Installation Guide
-
Surface Preparation: Ensure all bonding surfaces are clean, dry, and free from dust, oil, grease, and other contaminants.
-
Cleaning: Use a compatible cleaning method for the substrate. Confirm solvent compatibility before application.
-
Application Environment: Apply under controlled conditions with clean surfaces and suitable temperature and humidity.
-
Liner Removal: Remove the PET release liner carefully without touching the exposed adhesive.
-
Positioning: Align the tape accurately with the bonding area to avoid wrinkles, bubbles, or misalignment.
-
Pressure Application: Apply uniform pressure to establish intimate contact between the adhesive and substrate.
-
Bond Development: Allow sufficient time for adhesive wet-out and bond development before final performance evaluation.
For optical and display applications, clean-room handling and controlled lamination conditions are recommended. Test the complete assembly before mass production.
Storage
-
Store in the original packaging.
-
Recommended storage temperature: 16–27°C (60–80°F).
-
Recommended relative humidity: 40–60%.
-
Keep away from direct sunlight.
-
Protect from dust, moisture, and contamination.
-
For best performance, use within 12 months from the date of manufacture.
FAQ
1. What is 3M UCT-10 used for?
3M UCT-10 is used for transparent bonding applications such as mobile phone lens attachment, tablet screen attachment, backlit graphics, and electronic assembly.
2. Is 3M UCT-10 an optical clear adhesive (OCA)?
UCT-10 is an ultra-clear double-coated PET tape, not a conventional OCA film. It has a PET carrier and acrylic adhesive layers on both sides.
3. What is the thickness of 3M UCT-10?
Its total tape thickness is approximately 0.010 mm (10 μm), excluding the release liners.
4. What are the light transmission and haze values?
3M specifies approximately 90% light transmission and 1.1% haze.
5. Is 3M UCT-10 suitable for display bonding?
Yes. It is recommended for applications such as mobile phone lens attachment, tablet screen attachment, and backlit graphic bonding. The complete assembly should be tested for optical appearance and adhesion.
6. Can 3M UCT-10 be die-cut?
Yes. Its PET carrier and liner construction provide dimensional stability and improved handling for laminating and die-cutting operations.
7. Does 3M UCT-10 contain silicone adhesive?
No. It uses non-silicone acrylic adhesive.
8. What is the temperature resistance of 3M UCT-10?
The 3M TDS lists typical short-term temperature resistance of 177°C and long-term temperature resistance of 80°C. These values refer to different exposure durations and are not continuous-use guarantees.
Downloads
Available upon request:
- 3M UCT-10 Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Precision Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.






