< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=26111338921830424&ev=PageView&noscript=1" /> 3M 5498 PTFE Film Tape | Silicone-Free Adhesive, Low Friction & High-Temperature Performance

3M 5498 PTFE Film Tape | Silicone-Free Adhesive, Low Friction & High-Temperature Performance

Overview

3M™ PTFE Film Tape 5498 is a high-performance tape featuring an extruded polytetrafluoroethylene (PTFE) film backing and a non-silicone rubber adhesive. It provides a smooth, non-stick surface with low friction, making it suitable for mold release, masking, and applications where silicone contamination must be avoided. Its extruded PTFE backing lies flatter than typical skived PTFE film tapes.

Features

  • Extruded PTFE film backing

  • Non-silicone rubber pressure-sensitive adhesive

  • Low-friction, non-stick surface

  • Good resistance to abrasion and high temperatures

  • Lies flatter than typical skived PTFE film tapes

  • Suitable for applications where silicone contamination is a concern


Category:

Benefits

  • Easy release: Helps prevent materials from sticking to treated surfaces.

  • Reduced friction: Supports smoother movement between contacting surfaces.

  • Silicone-free adhesive: Suitable for manufacturing processes that restrict silicone contamination.

  • Clean removal: Designed to remove cleanly from a variety of surfaces under suitable conditions.

  • Process reliability: Helps reduce friction, squeaking, rattling, and machinery noise.

Technical Specifications

The following are typical values reported in 3M technical documentation. They are not guaranteed specifications.

Property Typical Value
Product Type PTFE Film Tape
Backing Material Extruded PTFE
Adhesive Type Non-silicone rubber
Color Brown / Beige, depending on product configuration
Backing Thickness Approx. 0.06 mm
Total Tape Thickness Approx. 0.107–0.11 mm
180° Peel Adhesion Approx. 5.1 N/cm
Tensile Strength Approx. 33.3 N/cm
Elongation at Break Approx. 388%
Long-Term Temperature Resistance Up to approx. 149°C
Short-Term High-Temperature Exposure Up to 204°C for shorter periods, subject to application conditions

Actual specifications may vary by product configuration and technical data sheet revision. Confirm the applicable TDS before final material selection.

Applications

  • Mold release in composite bonding processes

  • Masking and bundling composite parts before bonding

  • Low-friction surface protection

  • Reducing friction between moving components

  • Noise reduction in machinery and equipment

  • Industrial applications requiring non-silicone adhesive materials

  • High-temperature manufacturing processes within the product’s specified limits

Compatible Materials

Potential application surfaces include:

  • Metal

  • Selected plastics

  • Composite materials

  • Mold and tooling surfaces

  • Other clean, dry industrial substrates

Adhesion depends on surface energy, cleanliness, temperature, and process conditions. Test compatibility before production use.

Industries

  • Aerospace

  • Automotive

  • Electronics

  • Home appliances

  • Composite manufacturing

  • Metalworking

  • General industrial manufacturing

  • Maintenance, repair, and operations (MRO)

  • Transportation

Why Choose 3M 5498 PTFE Film Tape?

3M 5498 combines a low-friction PTFE film with a non-silicone rubber adhesive for applications where release performance and contamination control are important. Its relatively flat extruded backing makes it a practical option for composite tooling, masking, and industrial friction-reduction tasks.

Yousan New Materials can help customers evaluate suitable tape materials and converting options based on application requirements, dimensions, and production needs.

Installation Guide

  1. Clean the application surface and remove dust, oil, moisture, and other contaminants.

  2. Ensure the surface is dry before application.

  3. Cut the tape to the required dimensions.

  4. Apply evenly while avoiding wrinkles, trapped air, and excessive stretching.

  5. Press firmly to establish consistent contact.

  6. Test adhesion, release performance, and removal under actual operating conditions.

Follow the official 3M application instructions and verify performance under the intended process conditions.

Storage

  • Store in a clean, dry environment.

  • Keep the tape in its original packaging until use.

  • Protect it from direct sunlight, excessive heat, moisture, and contamination.

  • Follow the shelf-life and storage conditions specified in the applicable 3M documentation.

FAQ

1. What is 3M 5498 PTFE Film Tape used for?

It is commonly used for mold release, composite bonding preparation, masking, and reducing friction between contacting surfaces.

2. Does 3M 5498 use silicone adhesive?

No. It uses a non-silicone rubber pressure-sensitive adhesive, making it suitable for processes where silicone contamination is a concern.

3. What is the backing material?

The backing is extruded polytetrafluoroethylene (PTFE) film.

4. Is 3M 5498 suitable for high-temperature applications?

It offers temperature resistance for industrial processes, including certain short-duration exposures above its long-term operating temperature. Confirm the actual temperature, exposure duration, pressure, and process conditions against the latest TDS.

5. What is the total thickness of 3M 5498?

Typical product documentation reports approximately 0.107–0.11 mm total thickness, depending on the product configuration and document revision.

6. Can 3M 5498 be converted into custom widths or shapes?

Slitting and die-cutting feasibility depends on the required dimensions, tolerances, and order quantity. Contact Yousan to discuss the specific converting requirements.

7. Is 3M 5498 suitable for every plastic or composite surface?

No. Adhesion and removal performance vary by substrate and process conditions. Conduct a compatibility test before full-scale production.


Downloads

Available upon request:

Please contact our sales team if you require the latest technical documentation.

Scroll to Top