Benefits
- Heavy-duty traction: Large mineral particles provide strong underfoot grip for demanding applications.
- Reduced clogging: The coarse particle structure helps maintain traction where dirt, mud or debris could otherwise accumulate.
- High durability: The robust backing is designed for areas exposed to heavy traffic and demanding operating conditions.
- Reliable bonding: Acrylic adhesive provides strong adhesion to most suitable substrates.
- Weather and chemical resistance: Suitable for demanding indoor and outdoor environments.
- Improved safety visibility: Yellow and black-yellow versions make safety areas and hazards easier to identify.
- 5S support: High-visibility versions can be used as part of workplace safety and 5S organization programs.
Technical Specifications
| Property | Tesa 60954 |
|---|---|
| Product Type | Heavy-Duty Anti-Slip Tape |
| Color | Black / Yellow / Black-Yellow / Grey |
| Backing Material | PVC film coated with large mineral particles |
| Adhesive Type | Acrylic |
| Tape Thickness | 1,185 µm |
| Liner Thickness | 180 µm |
| Total Thickness | 1,365 µm |
| Adhesion to Steel | 7 N/cm |
| Tensile Strength | 40 N/cm |
| Elongation at Break | 35% |
| Temperature Resistance | -5°C to +80°C |
| Chemical Resistance | Good |
| Weathering Resistance | Good |
| Hand Tearability | Good |
| Die-Cutting | Suitable |
| Slip Resistance | R13 according to DIN 51130* |
* Black, yellow and grey: R13; black-yellow: R12.
The technical values are representative/average values and should not be treated as contractual specifications. The current tesa product page lists 1,185 µm tape thickness + 180 µm liner = 1,365 µm total thickness, 40 N/cm tensile strength and 7 N/cm adhesion to steel.
Applications
Tesa 60954 is designed for permanent anti-slip protection in demanding environments, including:
- Construction vehicles
- Truck and trailer steps
- Semi-trailers
- Heavy equipment
- Construction machinery
- Forestry equipment
- Agricultural machinery
- Industrial platforms
- Ramps
- Stairs
- Walkways
- High-traffic industrial areas
- Factory and warehouse access areas
- Machinery access platforms
- Vehicle steps
- Areas exposed to water, oil, mud or dirt
- 5S workplace safety marking
tesa specifically highlights construction vehicles, semi-trailers, platforms, ramps, forestry equipment and agricultural equipment as application fields.
Compatible Materials
Tesa 60954 provides secure bonding to most suitable surfaces, but actual adhesion depends on substrate condition, surface energy, cleanliness and application environment.
Potential substrates include:
- Steel
- Stainless steel
- Aluminum
- Painted metal
- Powder-coated metal
- Industrial machinery surfaces
- Metal platforms
- Vehicle steps
- Painted wood
- Suitable rigid plastics
- Other clean, smooth and stable substrates
For porous, rough, contaminated, low-surface-energy or specially coated substrates, application testing is recommended before production use.
For irregular, embossed or tread-plate surfaces, consider tesa 60955 Conformable, which uses an aluminum carrier designed to conform to irregular surfaces.
Industries
- Manufacturing
- Construction
- Automotive
- Transportation
- Logistics & Warehousing
- Agriculture
- Forestry
- Heavy Equipment
- Industrial Machinery
- Marine
- Commercial Facilities
- Industrial Safety
- Material Handling
- Infrastructure & Maintenance
Why Choose
Tesa 60954 is a strong choice when a standard anti-slip tape is not sufficient for the application environment.
Compared with the general-purpose tesa 60950, the 60954 uses larger mineral particles, a thicker anti-slip construction and a heavier-duty design. Its coarse surface helps reduce clogging, while its durable backing is intended for permanent heavy-duty applications.
The current tesa comparison lists:
| Product | 60950 | 60954 |
|---|---|---|
| Total Thickness | 900 µm | 1,365 µm |
| Adhesion to Steel | 5.8 N/cm | 7 N/cm |
| Tensile Strength | 30 N/cm | 40 N/cm |
| Mineral Surface | Mineral particles | Large mineral particles |
| Application Positioning | General purpose | Heavy duty |
This makes 60954 particularly relevant for heavy traffic, machinery, vehicles, platforms, ramps and harsh industrial environments.
Installation Guide
- Clean the substrate
Remove dust, dirt, oil, grease, moisture and other contaminants. - Check the surface condition
The substrate should be stable and sufficiently smooth for good adhesive contact. - Measure the application area
Determine the required tape length and width. For corners, avoid sharp tape corners where possible. - Cut the tape
Tesa 60954 has good hand tearability and is also suitable for die-cutting. - Position the tape
Carefully align the tape before the adhesive makes full contact with the substrate. - Apply firm pressure
Press the tape firmly across the entire surface, especially along the edges. - Check edge adhesion
Make sure there are no lifted edges, bubbles or unbonded sections. - Allow the adhesive to establish contact
Avoid exposing the newly installed tape to severe traffic or harsh conditions immediately after application.
For difficult substrates or critical safety applications, conduct a test installation before full-scale application.
Storage
Store tesa 60954 in its original packaging in a clean and dry environment.
Recommended storage conditions should protect the product from:
- Direct sunlight
- Excessive heat
- Moisture
- Dust and contamination
- Mechanical damage
Keep rolls properly packaged until use. For specific shelf-life and storage requirements, the latest product documentation and packaging information for the supplied batch should take precedence.
FAQ
Q1: What is tesa 60954 Anti-Slip Tape?
Tesa 60954 is a heavy-duty anti-slip adhesive tape with a PVC film backing coated with large mineral particles and an acrylic adhesive.
Q2: What is tesa 60954 used for?
It is designed for permanent heavy-duty anti-slip applications such as construction vehicles, semi-trailers, platforms, ramps, forestry equipment and agricultural machinery.
Q3: Is tesa 60954 suitable for outdoor applications?
Yes. tesa specifies good weathering resistance and positions 60954 for demanding applications including vehicles, construction equipment, forestry and agricultural equipment.
Q4: What is the thickness of tesa 60954?
The current product information specifies 1,185 µm tape thickness, 180 µm liner thickness and 1,365 µm total thickness.
Q5: What is the temperature range of tesa 60954?
The available tesa technical information lists a temperature resistance of approximately -5°C to +80°C.
Q6: What does R13 mean for tesa 60954?
R13 is the highest slip-resistance classification in the DIN 51130 ramp-test classification used for these products. For 60954, black, yellow and grey versions are R13, while the black-yellow version is R12.
Q7: Does tesa 60954 work in wet or dirty environments?
It is designed for demanding conditions, and tesa highlights its coarse particles, reduced clogging and use in harsh environments. Its application range includes areas exposed to water, oil, mud and other contaminants.
Q8: What colors are available for tesa 60954?
The product is available in black, yellow, black-yellow and grey. Yellow and black-yellow provide higher visual contrast for safety identification and warning applications.
Q9: Can tesa 60954 be die-cut?
Yes. tesa lists 60954 as suitable for die-cutting, making it suitable for custom shapes and converted anti-slip components.
Q10: Is tesa 60954 hand tearable?
Yes. The current technical information lists good hand tearability.
Q11: What is the difference between tesa 60954 and 60950?
60954 is the Heavy Duty version, with larger mineral particles and a more robust construction. It is thicker and has higher listed adhesion and tensile strength than 60950.
Q12: What is the difference between tesa 60954 and 60955?
60954 is designed for heavy-duty applications on suitable surfaces, while 60955 uses an aluminum carrier specifically designed to conform to tread plates, rough surfaces, edges and corners.
Downloads
Available upon request:
- Tesa 60954 Anti Slip Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Adhesive Tape Selection Guide
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.
