Benefits
High-Traction Surface
The mineral-coated abrasive surface provides reliable friction for walking and working areas.
Highly Visible Safety Color
Safety Yellow makes steps, walkways, ramps and hazardous areas easier to identify.
Heavy-Duty Durability
The surface is designed to withstand the demands of equipment traffic as well as pedestrian traffic.
Low-Profile Design
The relatively low-profile construction helps reduce the potential trip hazard associated with raised floor coverings.
Easy Pressure-Sensitive Application
The high-performance PSA allows the material to be bonded directly to properly prepared surfaces.
Suitable for Customized Applications
3M offers standard configurations as well as custom shapes and sizes for different floor-safety requirements.
Technical Specifications
| Property | 3M™ Safety-Walk™ 630 |
|---|---|
| Product Series | General Purpose 600 Series |
| Product Number | 630 / 630-B |
| Color | Safety Yellow |
| Surface | Mineral-coated, high friction |
| Adhesive | Pressure-sensitive adhesive |
| Applied Weight | Approx. 730 g/m² |
| Minimum Application Temperature | 10°C / 50°F |
| Maximum Service Temperature | 66°C / 150°F |
| Dynamic COF – Rubber / Dry | Approx. 1.02 |
| Dynamic COF – Rubber / Water | Approx. 1.05 |
| Dynamic COF – Rubber / Oil | Approx. 0.90 |
| Static COF – Rubber / Dry | Approx. 1.30 |
| Static COF – Rubber / Water | Approx. 1.25 |
| Static COF – Rubber / Oil | Approx. 1.31 |
| NFSI | High Traction Certification |
| Flammability | ASTM E648 / NFPA 253: Class I |
| FAA 25.855-F-1 | Pass — applicable 630 configuration |
| FAA 25-853-F-1 | Pass — applicable 630 configuration |
These are typical values, not guaranteed product specifications for every configuration. The current 3M Technical Data Sheet identifies 630 as Safety Yellow within the General Purpose 600 Series.
3M currently lists examples including 3/4 in × 60 ft, 1 in × 60 ft, 2 in × 60 ft, 12 in × 60 ft and wider jumbo-roll configurations, depending on SKU.
Applications
- Factory floors
- Industrial walkways
- Warehouse floors
- Stair treads
- Stairways
- Step edges
- Building entrances
- Ramps
- Loading areas
- Platforms
- Ladders
- Machine access areas
- Construction machinery
- Industrial vehicles
- Lawn equipment
- Material-handling equipment
- Areas requiring highly visible floor-safety markings
3M specifically lists flat surfaces, steps, stairways, entrances, ramps, ladders, lawn equipment, snowmobiles, scooters, construction machinery and vehicles as application areas.
Bathroom / wet-area applications:
630 provides high traction and published wet-condition friction performance, but it should not be marketed as universally suitable for every bathroom or barefoot application. For wet environments, substrate condition, water exposure, cleaning chemicals, installation and edge protection should be evaluated.
Compatible Materials
3M Safety-Walk 630 can be applied to properly prepared, clean and dry hard surfaces such as:
- Painted metal
- Aluminum
- Stainless steel
- Concrete
- Cementitious surfaces
- Wood
- Rigid plastics
- Painted flooring
- Industrial flooring
- Smooth hard surfaces
For rough or porous surfaces, 3M recommends considering an appropriate primer. The current 3M technical documentation lists 3M™ Nitrile Industrial Adhesive 4491 as a primer for rough or porous surfaces.
For demanding applications exposed to excessive moisture or liquids, 3M also lists Safety-Walk Edging Compound for protecting exposed edges.
Industries
- Manufacturing
- Automotive
- Warehousing & Logistics
- Construction
- Transportation
- Material Handling
- Industrial Equipment
- Facilities Management
- Commercial Buildings
- Public Infrastructure
- Workshops
- Factories
- Marine
- Equipment Maintenance
Why Choose
3M™ Safety-Walk™ 630 combines a mineral-coated high-friction surface with a highly visible Safety Yellow color, making it a strong choice for industrial floor-safety applications.
Compared with 3M 610 Black, 630 provides the same General Purpose 600 Series positioning but with a bright yellow appearance. Compared with 3M 620 Clear, 630 prioritizes visual visibility rather than maintaining the appearance of the substrate.
For areas such as factory floors, stairways, ramps, platforms and industrial walkways, the combination of high traction and Safety Yellow visibility makes 630 particularly suitable for floor-safety programs.
Installation Guide
1. Clean the substrate
Remove dust, dirt, oil, grease, wax and other contaminants.
2. Dry the surface
Make sure the surface is completely dry before installation.
3. Inspect the substrate
Remove loose paint, damaged coatings and unstable surface materials.
4. Measure and cut
Cut the 630 tape to the required length or shape.
5. Position the tape
Carefully position the tape before applying firm pressure.
6. Apply progressively
Apply from one end toward the other to minimize trapped air.
7. Apply firm pressure
Use a Safety-Walk Rubber Hand Roller to obtain good adhesive contact. 3M specifically recommends its rubber hand roller for Safety-Walk installation.
8. Secure the edges
For applications exposed to excessive moisture or liquids, consider appropriate edge protection.
9. Allow adequate bonding time
Avoid unnecessary heavy traffic immediately after installation.
For porous or rough substrates, primer may be required. Proper surface preparation is critical to long-term adhesion.
Storage
Store 3M™ Safety-Walk™ 630 in its original packaging in a clean, dry environment, protected from direct sunlight, excessive heat, moisture and contamination.
Keep the abrasive surface and adhesive liner protected from dirt and physical damage.
For commercial inventory management, follow the storage conditions and shelf-life information specified for the exact SKU and packaging.
FAQ
Q1: What is 3M 630 anti-slip tape?
3M 630 is a Safety Yellow mineral-coated, high-friction anti-slip tape belonging to the Safety-Walk General Purpose 600 Series.
Q2: What color is 3M 630?
3M 630 is Safety Yellow.
Q3: Is 3M 630 suitable for stairs?
Yes. 3M specifically lists steps and stairways among its applications.
Q4: Can 3M 630 be used on factory floors?
Yes. Its General Purpose 600 Series construction is intended for areas with light to heavy shoe traffic and equipment traffic.
Q5: Is 3M 630 suitable for ramps?
Yes. Ramps are one of the applications listed by 3M.
Q6: Is 3M 630 waterproof?
It should not simply be described as a “waterproof tape.” The product has published wet-condition friction performance, but long-term performance in wet environments depends on the substrate, installation, edge condition and exposure.
Q7: What is the difference between 3M 610 and 630?
Both are General Purpose 600 Series mineral-coated anti-slip tapes. 610 is Black, while 630 is Safety Yellow.
Q8: What is the difference between 3M 630 and 613?
630 is solid Safety Yellow, while 613 uses a Safety Yellow/Black Stripe design. Both are General Purpose 600 Series products.
Q9: Can 3M 630 be used in bathrooms?
It can be considered for selected wet floor applications, but suitability depends on the substrate, water exposure, cleaning conditions and whether the area is intended for shoes or barefoot traffic. It should not be presented as universally suitable for every bathroom application.
Q10: Can 3M 630 be die-cut?
Yes. 3M states that custom shapes and sizes are available.
Q11: Is 3M 630 suitable for heavy traffic?
Yes. 3M specifies it for light to heavy shoe-traffic areas, with a durable surface designed to withstand equipment traffic.
Downloads
Available upon request:
- 3M 630 Anti Slip Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Adhesive Tape Selection Guide
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.
