Benefits
-
Helps improve bonding reliability in automotive interior assembly.
-
Supports attachment of foam, cushioning, and trim components.
-
Enables bonding of selected plastics that are challenging for conventional adhesives.
-
Improves handling during roll slitting, laminating, and die-cutting.
-
Helps simplify assembly by providing a thin, double-sided bonding solution.
-
Supports applications where low odor and low VOC emissions are important considerations.
Technical Specifications
|
Property |
Specification |
|---|---|
|
Brand |
3M™ |
|
Model |
DCX1018 |
|
Product type |
Low VOC double-coated tissue tape |
|
Adhesive type |
Acrylic pressure-sensitive adhesive |
|
Carrier |
Tissue |
|
Appearance |
Translucent / off-white |
|
Total tape thickness, excluding liner |
Approximately 0.13 mm (5 mil) |
|
Face-side adhesive thickness |
Approximately 0.04 mm (1.7 mil) |
|
Carrier thickness |
Approximately 0.04 mm (1.6 mil) |
|
Back-side adhesive thickness |
Approximately 0.04 mm (1.7 mil) |
|
Release liner |
Polycoated kraft paper (PCK) |
|
Liner thickness |
Approximately 0.10 mm (4.2 mil) |
|
Liner appearance |
White with green logo |
|
Typical 180° peel adhesion |
15.3 N/cm on stainless steel under specified test conditions |
|
Short-term temperature resistance |
149°C (300°F) |
|
Long-term temperature resistance |
121°C (250°F) |
|
Automotive specification reference |
FCA 9.55368 |
|
Example roll size |
1000 mm × 50 m |
|
Other available sizes |
Widths and lengths vary by SKU and market |
Values are typical reference data from 3M documentation, not guaranteed specifications. The official US technical data sheet lists a total thickness of approximately 0.13 mm, while some regional product pages display 0.10 mm. Confirm the applicable regional SKU before publishing final specifications or quoting customers. Peel adhesion and temperature performance depend on the specified test conditions and actual application.
Applications
-
Automotive interior trim attachment
-
Bonding EPDM foam and polyurethane foam
-
Attachment of microcellular urethane cushioning
-
Fixing polypropylene (PP) components
-
Bonding foam seals and cushioning materials
-
Attachment of interior insulation and acoustic materials
-
Appliance trim and cushioning assembly
-
Precision die-cut adhesive parts for OEM manufacturing
-
Industrial lamination of compatible foam and plastic substrates
Compatible Materials
3M DCX1018 is designed for bonding a range of materials, including:
-
EPDM foam
-
Microcellular urethane foam
-
Polyurethane foam
-
Polypropylene (PP)
-
Selected polyethylene (PE) and other olefin materials
-
Selected plastics and polymer films
-
Automotive interior trim materials
-
Other compatible foam and cushioning substrates
Actual adhesion depends on the specific material formulation, surface energy, texture, cleanliness, and application conditions. Test the exact material combination before production use.
Industries
-
Automotive manufacturing and automotive interiors
-
Automotive component suppliers
-
Appliance manufacturing
-
Building materials and foam insulation
-
Electronics and equipment assembly
-
Foam converting and gasket fabrication
-
Industrial component manufacturing
-
OEM and precision die-cutting operations
Why Choose 3M DCX1018?
3M DCX1018 combines a flexible tissue carrier with a high-tack, low-VOC acrylic adhesive system. It is particularly suited to applications requiring strong initial adhesion, long-term holding power, and reliable attachment of foam and selected low-surface-energy plastics.
Its converting characteristics also make it suitable for precision slitting and die-cutting, helping manufacturers produce adhesive parts for automotive trim, cushioning, and other industrial assemblies.
For OEM applications, confirm the required bond strength, emission requirements, substrate compatibility, and operating conditions before selecting the tape.
Installation Guide
-
Prepare the surface: Ensure both surfaces are clean, dry, and free from dust, oil, and release agents.
-
Check compatibility: Test the tape on the actual foam, plastic, or trim material, especially when bonding PP or other low-surface-energy substrates.
-
Position the tape: Align the tape carefully and avoid wrinkles or trapped air.
-
Apply pressure: Use firm, even pressure to establish good adhesive contact.
-
Remove the liner: Peel off the release liner without touching or contaminating the exposed adhesive.
-
Complete bonding: Align the second substrate and press firmly over the bonding area.
-
Validate performance: Evaluate adhesion, holding power, and environmental durability under actual production conditions.
Storage
-
Store in the original packaging until use.
-
Keep in a clean, dry environment away from direct sunlight.
-
Protect rolls from dust, moisture, excessive heat, and physical damage.
-
Avoid unnecessary exposure of the adhesive to contaminants.
-
Follow the latest 3M technical documentation for the applicable storage temperature, humidity, and shelf-life recommendations.
FAQ
1. What is 3M DCX1018 tape?
3M DCX1018 is a low-VOC double-coated tissue tape featuring acrylic adhesive on both sides of a tissue carrier.
2. What is 3M DCX1018 used for?
It is commonly used for automotive interior assembly, foam bonding, trim attachment, cushioning, and bonding selected plastics.
3. Is 3M DCX1018 suitable for polypropylene (PP)?
Yes. 3M specifically identifies polypropylene as a suitable low-surface-energy substrate. Testing is recommended for the exact material grade and surface condition.
4. Can 3M DCX1018 bond foam materials?
Yes. It is designed for a range of compatible foams, including EPDM, microcellular urethane, and polyurethane foam.
5. What does low VOC mean?
VOC stands for volatile organic compounds. DCX1018 is designed for applications where low emissions and low odor are important. Refer to the applicable regional product documentation for specific test methods and compliance requirements.
6. How thick is 3M DCX1018?
The US technical data sheet lists approximately 0.13 mm (5 mil), excluding the liner. Some regional product listings report approximately 0.10 mm, so verify the specification for the exact SKU.
7. Can 3M DCX1018 be die-cut?
Yes. Its tissue carrier improves handling and dimensional stability during slitting and die-cutting, making it suitable for custom adhesive parts.
8. What is the temperature resistance of 3M DCX1018?
The US technical data sheet lists typical short-term resistance of 149°C and long-term resistance of 121°C. These values are not guarantees of bond performance at those temperatures; the actual application must be evaluated.
9. Is 3M DCX1018 suitable for automotive interiors?
Yes. It is specifically positioned for automotive interior applications, where foam bonding and low-VOC characteristics can be important.
Downloads
Available upon request:
- 3M DCX1018 Low VOC Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Custom Die-Cut Adhesive Solution Guide
Please contact our sales team if you require the latest technical documentation.







