Benefits
-
Helps protect residue-sensitive PCB areas during high-temperature processing.
-
Reduces the potential for silicone contamination in sensitive electronic manufacturing processes.
-
Supports clean removal after specified thermal exposure.
-
The release liner makes the product suitable for controlled placement and converting applications.
-
Low-static properties help reduce static-related concerns during unwinding and handling.
-
Chemical resistance supports selected industrial masking applications.
-
Thin construction supports precision masking of selected electronic components and surfaces.
Technical Specifications
| Property | Typical Value |
|---|---|
| Product Model | 3M 7419L |
| Product Type | Linered low-static polyimide film tape |
| Backing Material | DuPont™ Kapton® polyimide film |
| Adhesive Type | Silicone-free acrylic |
| Release Liner | Polyester film |
| Color | Amber |
| Polyimide Backing Thickness | 0.025 mm (1.0 mil) |
| Adhesive Thickness | 0.020 mm (0.8 mil) |
| Total Tape Thickness, Excluding Liner | 0.046 mm (1.8 mil) |
| Adhesion to Stainless Steel, Initial | Approximately 4.52 N/100 mm |
| Adhesion to Stainless Steel, After 72 Hours at Room Temperature | Approximately 5.65 N/100 mm |
| Adhesion to Stainless Steel, After 10 Minutes at 260°C | Approximately 19 N/100 mm |
| Adhesion to Copper, Initial | Approximately 4.52 N/100 mm |
| Adhesion to Copper, After 72 Hours at Room Temperature | Approximately 5.65 N/100 mm |
| Adhesion to Copper, After 10 Minutes at 260°C | Approximately 11 N/100 mm |
| Static Discharge During Roll Removal | Less than 100 volts |
| Dielectric Strength | 6,000 volts |
| Surface Resistivity | 5 × 10⁶ ohms/square |
| High-Temperature Exposure | 260°C (500°F) for 10 minutes under specified conditions |
| Standard Roll Length | 33 m (36 yd) |
Note: Values are representative or typical data and should not be used as guaranteed specifications. Confirm the current technical data sheet and product Certificate of Analysis for critical applications. High-temperature performance refers to specified short-term exposure, not continuous operation at 260°C.
Applications
-
PCB solder masking during wave soldering.
-
Masking or protecting residue-sensitive areas during solder reflow.
-
Temporary protection of selected electronic substrates during thermal processing.
-
Precision masking in electronic component manufacturing.
-
Die-cut masking components requiring a release liner.
-
Converting applications requiring controlled adhesive placement.
-
Selected chemical masking processes.
-
Electronic manufacturing applications where silicone contamination must be minimized.
Compatible Materials
Subject to surface condition and process validation, 3M 7419L may be suitable for:
-
Printed circuit boards.
-
Copper surfaces and copper-clad substrates.
-
Selected electronic component surfaces.
-
Gold-finished PCB areas.
-
Compatible metal and electronic substrates used in thermal processing.
The substrate should be smooth, clean, dry, and free from oil and dust. The tape may not bond or conform adequately to low-surface-energy materials, rough surfaces, or sharply curved areas.
Industries
-
Electronics manufacturing.
-
Printed circuit board assembly.
-
Electronic component manufacturing.
-
Electrical and electronic equipment production.
-
Semiconductor-related manufacturing processes.
-
Precision industrial masking.
-
Manufacturing processes requiring silicone-free adhesive materials.
Why Choose 3M 7419L Polyimide Tape?
3M 7419L combines a high-temperature polyimide film backing, silicone-free acrylic adhesive, low-static performance, and a polyester release liner. It is designed for PCB solder masking and other demanding applications where controlled handling, reduced silicone contamination risk, and clean removal are important.
Compared with the non-linered 3M 7419, the 7419L version includes a release liner, which can be useful for handling, positioning, and die-cut converting.
Yousan can help evaluate sourcing, slitting, and converting options according to project requirements. Product availability and customization feasibility should be confirmed before quotation.
Installation Guide
-
Verify that the selected tape is compatible with the substrate and thermal process.
-
Clean the surface and ensure it is dry and free from oil, dust, and other contaminants.
-
Cut the required tape length or prepare the converted part.
-
Remove the polyester release liner carefully without contaminating the adhesive surface.
-
Position the tape accurately and apply firm, even pressure to establish good contact.
-
Check for wrinkles, trapped air, and lifted edges before processing.
-
Validate masking performance and removal under actual temperature, exposure time, and process conditions.
-
After processing, remove the tape carefully and inspect the substrate for residue or damage.
Conduct application testing before production use, especially for critical electronic assemblies.
Storage
-
Store the tape in its original packaging.
-
Recommended storage temperature: 16–27°C (60–80°F).
-
Recommended relative humidity: approximately 40–60%.
-
Keep away from direct sunlight, excessive heat, moisture, dust, and chemical contamination.
-
Refer to the current 3M documentation for the applicable shelf life and storage requirements.
FAQ
1. What is 3M 7419L tape used for?
It is primarily used for PCB solder masking and protecting residue-sensitive areas during high-temperature electronic manufacturing processes.
2. What is the difference between 3M 7419 and 3M 7419L?
The 7419L version includes a polyester release liner, while 7419 is the non-linered version. The liner can facilitate handling, positioning, and converting operations.
3. Does 3M 7419L use silicone adhesive?
No. It uses a specially formulated acrylic adhesive that does not rely on silicone, helping reduce the risk of silicone contamination.
4. Can 3M 7419L withstand 260°C?
It is designed for short-term exposure to 260°C (500°F) for 10 minutes under specified conditions. This should not be interpreted as a continuous operating-temperature rating.
5. What is the thickness of 3M 7419L?
The total tape thickness is approximately 0.046 mm (1.8 mil), excluding the polyester release liner.
6. Does 3M 7419L have low-static properties?
Yes. Static discharge during removal from the roll is specified as less than 100 volts under the stated test conditions.
7. Can 3M 7419L be die-cut into custom shapes?
The release liner makes the product suitable for evaluating die-cutting and other converting processes. Actual feasibility depends on the required geometry, tolerances, quantity, and tooling.
8. Is 3M 7419L currently available?
Availability may vary by region and product configuration. Confirm the current status, lead time, and stock with 3M or an authorized supplier before placing an order.
Downloads
Available upon request:
- 3M 7419L Polyimide Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.







