Benefits
-
Discreet appearance: The black matte finish helps minimize visible reflections in lighting and entertainment applications.
-
Light leakage control: Helps block unwanted light escaping from recessed floor fixtures and similar equipment.
-
Flexible maintenance: Removability makes it useful for temporary masking, repairs, and selected service operations.
-
Heat-resistant performance: Suitable for certain applications involving elevated temperatures, within the specified operating limits.
-
Convenient converting: Die-cutting capability supports custom shapes and precise component placement.
-
Multi-purpose protection: Provides a black foil surface for masking, covering, and repairing compatible components.
-
Application versatility: Suitable for selected appliance, stage lighting, and industrial equipment applications.
Technical Specifications
The following values are based on tesa’s published product information for tesa 50577. They are typical values, not guaranteed specifications.
|
Property |
Specification |
|---|---|
|
Product Name |
Tesa 50577 |
|
Product Type |
Black matte aluminum foil tape |
|
Backing Material |
Aluminum foil |
|
Aluminum Foil Thickness |
50 μm |
|
Adhesive Type |
Acrylic |
|
Adhesive Color |
Black |
|
Surface Finish |
Matte black |
|
Total Tape Thickness |
85 μm |
|
Release Liner |
White paper |
|
Liner Thickness |
65 μm |
|
Adhesion to Steel |
5 N/cm |
|
Adhesion to Backing |
5 N/cm |
|
Tensile Strength |
40 N/cm |
|
Elongation at Break |
5% |
|
Operating Temperature |
−40°C to +160°C |
|
Short-Term Temperature Resistance |
160°C for 30 minutes |
|
Water Resistance |
Very good |
|
Abrasion Resistance |
Good |
|
Die-Cutting Suitability |
Yes |
|
Hand Tearability |
Very good |
Technical note: Temperature resistance depends on the test method and application conditions. Confirm the latest regional technical data sheet before specifying the product for a particular assembly.
Applications
-
Stage and entertainment lighting: Covering gaps and preventing unwanted light leakage from lighting fixtures.
-
Recessed floor fixtures: Masking openings and helping prevent light escaping from selected floor-mounted lighting equipment.
-
Lighting accessories: Fixing and shaping barn doors and other compatible lighting components.
-
Heating equipment: Bonding coils in suitable heater assemblies.
-
Air-conditioning systems: Securing coils and components where the tape meets the application’s temperature and adhesion requirements.
-
High-temperature masking: Temporary covering or masking where subsequent tape removal is required.
-
Discreet repairs: Repairing black surfaces where a matte finish helps reduce visual contrast.
-
Appliance manufacturing: Masking, covering, and securing selected components.
These applications follow the manufacturer’s stated application fields. Verify the suitability of the complete assembly before use.
Compatible Materials
Tesa 50577 may be suitable for use on clean, dry surfaces compatible with its acrylic adhesive, including:
-
Aluminum and other compatible metal surfaces
-
Selected painted metal components
-
Black appliance housings and equipment panels
-
Compatible lighting fixture surfaces
-
Selected heater and air-conditioning coil assemblies
-
Other substrates that pass adhesion and removal testing
Important: Adhesion and residue-free removal depend on the substrate, coating, surface condition, temperature, application pressure, and dwell time. Test the tape on the actual surface before production use.
Industries
-
Stage lighting and entertainment technology
-
Professional lighting equipment manufacturing
-
Home appliance manufacturing
-
Heating, ventilation, and air conditioning (HVAC)
-
Electrical and lighting equipment
-
Industrial equipment manufacturing
-
Maintenance, repair, and operations (MRO)
-
Industrial tape converting and precision die-cutting
Why Choose Tesa 50577 Black Matte Aluminium Foil Tape?
Tesa 50577 combines a black matte aluminum foil backing with a black acrylic adhesive to deliver a discreet finish alongside heat resistance, mechanical durability, and moisture resistance.
Unlike conventional silver aluminum foil tapes, its black surface is designed for applications where visible metallic reflections are undesirable. Its removable characteristics also make it useful for selected maintenance, masking, and temporary fixing tasks.
For manufacturers of stage lighting, appliances, and industrial equipment, tesa 50577 offers a specialized solution where appearance, temperature resistance, and potential clean removal are important. Always verify the required adhesion and removal performance under actual operating conditions.
Installation Guide
-
Prepare the surface: Clean the bonding area and remove dust, grease, oil, and other contaminants.
-
Check compatibility: Test the tape on the actual substrate, particularly painted or coated surfaces.
-
Measure and cut: Cut the tape to the required length or prepare custom die-cut shapes.
-
Position accurately: Align the tape before application to avoid wrinkles and unnecessary repositioning.
-
Apply firm pressure: Press the tape evenly to ensure good contact between the adhesive and the substrate.
-
Inspect the application: Check edges, corners, and overlaps for lifting or gaps.
-
Verify removal: If the tape will be removed later, test the removal process after the expected dwell time and temperature exposure.
Do not apply the tape outside its specified temperature range or assume that residue-free removal is guaranteed on every substrate.
Storage
-
Keep the tape in its original packaging until use.
-
Store it in a clean, dry environment away from direct sunlight.
-
Protect the roll from excessive heat, moisture, dust, and contamination.
-
Avoid crushing the roll or damaging the edges.
-
Follow the latest manufacturer guidance for storage conditions and shelf life.
For long-term inventory, confirm the applicable shelf-life recommendations with the supplier or manufacturer.
FAQ
1. What is tesa 50577 used for?
It is used for stage lighting, preventing light leakage, fixing lighting accessories, bonding selected heater and air-conditioning coils, high-temperature masking, and discreet repairs on black surfaces.
2. Is tesa 50577 a black aluminum foil tape?
Yes. It features a black 50 μm aluminum foil backing, a black acrylic adhesive, and a matte surface finish.
3. What is the total thickness of tesa 50577?
The published total tape thickness is 85 μm, excluding the 65 μm paper release liner.
4. What is the temperature resistance of tesa 50577?
The manufacturer lists an operating temperature range of −40°C to +160°C and short-term temperature resistance of 160°C for 30 minutes. Confirm the current technical data sheet for your specific application.
5. Can tesa 50577 be removed without adhesive residue?
The manufacturer describes it as easy to remove without residue. Actual results depend on the substrate, dwell time, temperature, and environmental conditions, so testing is recommended.
6. Is tesa 50577 suitable for die cutting?
Yes. The manufacturer lists it as suitable for die cutting, allowing custom shapes for lighting and industrial components.
7. Is tesa 50577 moisture-resistant?
Yes. It has very good water resistance and vapor-tight properties according to the manufacturer’s product information.
8. What adhesive does tesa 50577 use?
It uses a black acrylic pressure-sensitive adhesive.
9. What is the difference between tesa 50577 and tesa 50575?
tesa 50577 uses a black matte aluminum foil backing and black adhesive for discreet applications, while tesa 50575 is a silver aluminum foil tape intended for more general industrial sealing, insulation, and appliance applications. Their technical specifications and application requirements differ.
Downloads
Available upon request:
- Tesa 50577 Aluminum Foil Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.







