Benefits
-
Helps create durable seals in ducts, joints, and appliance assemblies.
-
Supports refrigerator coil mounting and related appliance manufacturing processes.
-
Provides a reflective aluminum surface for thermal management applications.
-
Offers resistance to moisture and vapor in appropriately designed sealing systems.
-
Helps protect, mask, repair, and close selected industrial components.
-
Supports automated or precision converting processes through die-cutting compatibility.
-
Offers liner options to accommodate different handling and application workflows.
Technical Specifications
The following values are published by tesa for product identification and preliminary engineering reference. Values may vary by regional product version.
|
Property |
Specification |
|---|---|
|
Product Name |
Tesa 50575 |
|
Tape Type |
Aluminum foil tape |
|
Backing Material |
Aluminum foil |
|
Aluminum Foil Thickness |
80 μm |
|
Adhesive Type |
Acrylic |
|
Total Tape Thickness |
120 μm |
|
Liner Type |
Paper liner for PV1; no liner for PV0 |
|
Liner Thickness |
65 μm for the paper-lined version |
|
Liner Color |
White |
|
Tensile Strength |
65 N/cm |
|
Elongation at Break |
5% |
|
Adhesion to Steel |
6 N/cm on the referenced tesa regional product page |
|
Operating Temperature |
−50°C to +150°C on the referenced regional page |
|
Reflective Surface |
Yes |
|
Water Resistance |
Very good |
|
Abrasion Resistance |
Very good |
|
Hand Tearability |
Good |
|
Suitable for Die Cutting |
Yes |
Note: tesa’s regional pages report different adhesion and temperature values. Confirm the current technical data sheet for the exact version and market before using these figures as contractual specifications. Published technical values are typical values, not guaranteed specifications.
Applications
-
Appliance manufacturing: Mounting refrigerator coils and sealing selected appliance components.
-
HVAC systems: Sealing air ducts and joints where aluminum foil tape is suitable.
-
Thermal insulation: Reflective surface applications and general-purpose temperature insulation.
-
Industrial maintenance: Masking, protecting, repairing, and closing suitable surfaces.
-
Paint stripping processes: Masking components during paint removal operations.
-
Precision converting: Die-cut aluminum foil tape components for assembly and manufacturing processes.
These applications reflect the manufacturer’s stated application fields; suitability should be checked against the actual operating conditions.
Compatible Materials
Tesa 50575 may be used on clean, dry, compatible surfaces, subject to application testing.
-
Aluminum and other suitable metal surfaces
-
Metal ductwork and HVAC components
-
Refrigerator coil assemblies and appliance components
-
Suitable rigid surfaces used in insulation and sealing assemblies
-
Selected industrial substrates compatible with acrylic pressure-sensitive adhesives
Important: The manufacturer’s published information does not establish universal compatibility with every plastic, painted surface, coating, or low-surface-energy material. Test adhesion and surface compatibility before production use.
Industries
-
Home appliance manufacturing
-
HVAC and refrigeration
-
Industrial equipment manufacturing
-
Building services and ductwork installation
-
Thermal insulation and energy management
-
Industrial maintenance, repair, and operations (MRO)
-
Tape converting and precision die-cutting
Why Choose Tesa 50575 Aluminium Foil Tape?
Tesa 50575 combines a robust aluminum foil backing with an acrylic adhesive for industrial sealing, masking, and appliance applications. Its mechanical resistance, moisture resistance, vapor-tight properties, reflective surface, and high thermal conductivity make it a useful option for suitable thermal management and sealing assemblies.
The availability of PV0 and PV1 versions supports different processing requirements, while its die-cutting suitability allows converters to produce custom shapes for industrial applications.
For OEMs, manufacturers, and industrial tape converters, the key is to select the correct liner version and verify adhesion, temperature exposure, and sealing performance under actual operating conditions.
Installation Guide
-
Prepare the surface: Ensure the substrate is clean, dry, and free of dust, oil, grease, and loose particles.
-
Check compatibility: Test adhesion on the actual substrate, especially on painted, coated, or plastic surfaces.
-
Measure and cut: Cut the tape to the required length or use precision die-cut components.
-
Position carefully: Align the tape before applying it to avoid wrinkles and trapped air.
-
Apply even pressure: Press the tape firmly across the bonded area to establish good adhesive contact.
-
Seal the edges: For duct sealing and moisture-related applications, ensure the tape overlaps and conforms properly to the joint geometry.
-
Inspect the bond: Check for lifting edges, gaps, wrinkles, and incomplete contact before placing the assembly into service.
Follow the current manufacturer instructions for the applicable version and application. Do not assume the tape is suitable for pressure-containing systems or every high-temperature environment.
Storage
-
Store the tape in its original packaging.
-
Keep it in a clean, dry environment away from direct sunlight and excessive heat.
-
Protect the adhesive surface from dust, oil, moisture, and contamination.
-
Avoid crushing, bending, or damaging the roll edges.
-
Follow the storage temperature, humidity, and shelf-life recommendations specified in the current product documentation.
For long-term inventory, confirm the applicable storage and shelf-life guidance with the supplier or manufacturer.
FAQ
1. What is tesa 50575 aluminum foil tape used for?
It is used for applications such as refrigerator coil mounting, duct sealing, general-purpose temperature insulation, and industrial masking, protection, repair, and closure.
2. What is the thickness of tesa 50575?
The aluminum foil backing is 80 μm thick, and the published total tape thickness is 120 μm. The paper liner on the PV1 version is listed separately at 65 μm.
3. What type of adhesive does tesa 50575 use?
It uses an acrylic pressure-sensitive adhesive.
4. Is tesa 50575 moisture-resistant?
Yes. The manufacturer describes it as moisture-resistant, with very good water resistance and vapor-tight properties. Actual sealing performance depends on the substrate, joint design, and application conditions.
5. Is tesa 50575 flame-retardant?
The manufacturer lists flame retardancy as a product feature. Confirm the applicable test standard and assembly requirements before specifying it for a regulated fire-safety application.
6. What is the operating temperature range?
Published tesa regional pages list different ranges. One page reports −40°C to +160°C, while another reports −50°C to +150°C. Verify the current regional data sheet for the exact product version before use.
7. Is tesa 50575 suitable for die cutting?
Yes. The manufacturer lists the product as suitable for die cutting, making it an option for custom-shaped components.
8. Does tesa 50575 come with a release liner?
It is available in PV0 without a liner and PV1 with a white paper liner.
9. Can tesa 50575 be used outdoors?
Outdoor suitability depends on exposure to weather, UV radiation, moisture, temperature cycling, and the condition of the substrate. Confirm the requirements and test the complete assembly before outdoor deployment.
Downloads
Available upon request:
- Tesa 50575 Aluminum Foil Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.







