Benefits
-
Helps protect heat-sensitive components from radiant heat and light.
-
Supports moisture vapor control and waterproof sealing in suitable assemblies.
-
Provides strong adhesion across a range of industrial substrates.
-
Conforms to irregular surfaces for convenient sealing and patching.
-
Helps simplify installation through its hand-tearable, linerless construction.
-
Supports indoor and outdoor maintenance and manufacturing applications.
-
Provides a versatile solution for heat reflection, thermal management, and general-purpose sealing.
Technical Specifications
| Property | Typical Value |
|---|---|
| Product Name | 3M™ Aluminum Foil Tape 34383 |
| Product Number | 34383 |
| Backing Material | Aluminum foil |
| Adhesive Type | Acrylic pressure-sensitive adhesive |
| Color | Silver |
| Backing Thickness | 0.07 mm (2.8 mil) |
| Total Tape Thickness | 0.11 mm (4.5 mil) |
| Release Liner | None; self-wound construction |
| 180° Peel Adhesion | 6.1 N/cm at 23°C |
| Tensile Strength | 52.5 N/cm |
| Elongation at Break | 11% |
| Long-Term Temperature Resistance | -40°C to 149°C, according to the September 2024 TDS |
| Standard Roll Length | 55 m (60 yd) |
| Storage Conditions | 16–27°C; 40–60% relative humidity |
| Recommended Shelf Life | Use within 24 months from manufacture under specified storage conditions |
| Specification Reference | L-T-80B may be applicable; confirm the required certification for the specific product |
Note: Technical values are typical values and should not be treated as guaranteed specification limits. Temperature ratings and certification status must be verified against the current documentation for the exact product configuration and intended application.
Applications
-
General-purpose heat reflection and dissipation
-
Protection of heat-sensitive components
-
Appliance manufacturing
-
HVAC and ductwork sealing, where appropriate
-
Moisture vapor barrier protection
-
Waterproof sealing of compatible joints and seams
-
Repairing tears in truck trailers and aircraft structures, subject to engineering approval
-
Splicing thin-gauge foils
-
General-purpose holding, patching, and sealing
-
Masking for paint stripping and electroplating
Compatible Materials
Subject to surface preparation and application testing, 3M 34383 may be used on:
-
Aluminum and other metal surfaces
-
Sheet-metal components
-
Suitable appliance surfaces
-
Compatible insulation facings
-
Selected painted or coated surfaces
-
Other clean, dry industrial substrates
Adhesion depends on the substrate, surface finish, contamination, and application conditions. Test compatibility before use on plastics, powder-coated surfaces, or specialty coatings.
Industries
-
Appliance manufacturing
-
HVAC and building services
-
Construction and insulation
-
Transportation and specialty vehicles
-
Aerospace maintenance, subject to engineering approval
-
Industrial equipment manufacturing
-
Metalworking and surface treatment
-
Maintenance, repair, and operations (MRO)
Why Choose 3M 34383 Aluminum Foil Tape?
3M 34383 combines a durable aluminum foil backing with an aggressive acrylic adhesive to provide a versatile solution for sealing, heat reflection, and moisture vapor protection. Its self-wound construction and hand-tearable backing support convenient application in industrial environments.
The tape is particularly useful when a flexible foil backing, strong adhesion, and resistance to environmental exposure are required. Its reflective surface helps protect heat-sensitive components, while its conformability supports sealing and patching on irregular surfaces.
For OEMs and industrial buyers, confirm the substrate, temperature exposure, moisture conditions, and any required certification before selecting the tape. For die-cutting or custom-converting applications, evaluate linerless handling and process compatibility before committing to production.
Installation Guide
-
Prepare the Surface: Ensure the substrate is clean, dry, and free from dust, oil, grease, and loose particles.
-
Check Application Conditions: For best results, apply to a clean, dry surface above 0°C.
-
Measure and Cut: Determine the required length and cut the tape with an appropriate tool if hand tearing is not suitable.
-
Position the Tape: Align the tape over the seam, joint, or target area.
-
Apply Firm Pressure: Press and smooth the tape to establish intimate contact and minimize wrinkles or trapped air.
-
Inspect the Application: Check the edges and overlaps for complete coverage and secure adhesion.
-
Validate Critical Applications: Test the tape under actual conditions when sealing, temperature resistance, or long-term reliability is critical.
Follow the current 3M instructions and relevant equipment or system requirements.
Storage
-
Store in the original packaging.
-
Recommended storage conditions are 16–27°C (60–80°F) and 40–60% relative humidity.
-
Protect the tape from direct sunlight, moisture, dust, and chemical contamination.
-
Keep rolls in their original packaging until use.
-
For best performance, use within 24 months from the date of manufacture under the specified storage conditions.
FAQ
1. What is 3M 34383 Aluminum Foil Tape used for?
It is used for heat reflection, thermal management, moisture vapor barrier protection, waterproof sealing, patching, and general-purpose industrial applications.
2. What adhesive does 3M 34383 use?
It uses an aggressive acrylic pressure-sensitive adhesive designed to adhere to a wide variety of surfaces.
3. Does 3M 34383 have a release liner?
No separate release liner is used. It is a self-wound tape designed to unwind from the roll for application.
4. What is the thickness of 3M 34383?
The typical aluminum foil backing thickness is 0.07 mm, and the total tape thickness is 0.11 mm.
5. What is its temperature resistance?
The September 2024 technical data sheet lists a long-term temperature resistance range of -40°C to 149°C. Always confirm suitability for the actual operating conditions and the current product documentation.
6. Can 3M 34383 be used outdoors?
It is designed to resist weather, moisture, UV degradation, and many chemicals. Actual outdoor performance depends on the substrate, exposure conditions, and required service life.
7. Is 3M 34383 electrically conductive?
The backing is aluminum foil, but this alone does not establish electrical continuity through the adhesive. For grounding or EMI/RFI shielding, choose a product with verified electrical performance data.
8. Can 3M 34383 be used for HVAC sealing?
It may be suitable for certain sealing applications, but confirm that its product classification and performance meet the applicable HVAC system requirements. Do not assume that it is interchangeable with a tape specifically listed for a particular duct system.
9. Can 3M 34383 be die-cut?
Its self-wound construction means it does not have a separate release liner. Die-cutting feasibility depends on the part design, adhesive handling, tooling, and converting process. A trial evaluation is recommended before production.
Downloads
Available upon request:
- 3M 34383 Aluminum Foil Tape Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.







