Benefits
- Improved dimensional stability: Glass fiber reinforcement helps reduce deformation under mechanical and thermal loads.
- High load-bearing capability: Suitable for components exposed to continuous mechanical stress.
- Excellent chemical resistance: Performs well in demanding chemical environments.
- Long service life: High wear resistance helps reduce replacement and maintenance requirements.
- Reliable high-temperature performance: Suitable for applications requiring elevated-temperature operation.
- Precision component manufacturing: Can be machined into custom industrial components.
- Electrical insulation: PEEK provides useful electrical insulating properties for suitable applications.
Technical Specifications
| Property | Specification |
|---|---|
| Material | PEEK (Polyether Ether Ketone) |
| Reinforcement | Approximately 30% Glass Fiber |
| Grade | Virgin Grade, subject to material availability |
| Form | Sheet / Plate |
| Color | Typically dark gray / brownish-gray, depending on formulation and manufacturer |
| Thickness | Custom thicknesses available |
| Standard / Cut Size | Custom sizes available |
| Machining | CNC machining, cutting and fabrication available |
| Chemical Resistance | Excellent |
| Wear Resistance | Excellent |
| Dimensional Stability | Excellent |
| Electrical Insulation | Good |
| Temperature Performance | High-temperature engineering application |
| Certification | Available according to material grade and application requirements |
Note: Exact mechanical, thermal, electrical, and dimensional specifications vary by manufacturer and grade. Material datasheets and certificates should be reviewed for critical applications.
Applications
PEEK 30% Glass Filled Sheets can be machined into:
- Bushings and bearings
- Wear rings
- Sealing components
- Valve components
- Pump components
- Insulating components
- Structural supports
- Precision machine parts
- High-temperature mechanical components
- Chemical processing components
- Semiconductor equipment components
- Aerospace components
- Custom CNC-machined parts
Compatible Materials
PEEK 30% Glass Filled Sheets can be used with or machined alongside various engineering materials, including:
- Stainless steel
- Carbon steel
- Aluminum
- Titanium
- Brass
- Copper
- PTFE
- PEEK
- PTFE-based sealing materials
- Other engineering plastics
Material compatibility should be evaluated according to temperature, chemical exposure, mechanical loading, friction, and operating environment.
Industries
- Aerospace & Defense
- Automotive
- Semiconductor & Electronics
- Chemical Processing
- Industrial Machinery
- Oil & Gas
- Energy
- Medical Equipment
- Precision Engineering
- Pump & Valve Manufacturing
- Automation Equipment
Why Choose
Yousan New Materials provides PEEK 30% glass-filled sheet solutions for demanding industrial applications. We can support customers with material selection, custom sizing, cutting, and precision machining according to project requirements.
Our engineering team can help determine whether virgin PEEK, 30% glass-filled PEEK, or another reinforced PEEK grade is appropriate based on mechanical load, temperature, chemical exposure, dimensional requirements, and electrical performance.
For OEM and industrial procurement projects, customers can request custom dimensions, material documentation, technical datasheets, and samples subject to product availability.
Installation Guide
PEEK 30% Glass Filled Sheets are normally supplied as raw sheet/plate material for further fabrication rather than as a finished adhesive product.
For machining and installation:
- Confirm the required material grade and dimensions.
- Check the required machining tolerances.
- Use suitable carbide or diamond tooling for glass-filled PEEK machining.
- Control cutting speed and heat generation during machining.
- Remove machining debris before assembly.
- Check the finished component against the required dimensions.
- Install using the appropriate mechanical fastening or assembly method.
- For critical applications, verify material and component performance under actual operating conditions.
Storage
- Store in a clean, dry and well-ventilated area.
- Keep sheets flat and properly supported.
- Avoid excessive heat and direct sunlight during storage.
- Protect the material from contamination, moisture, and mechanical damage.
- Keep original packaging in place until the material is required for processing.
- Avoid placing heavy objects on unsupported sheets.
FAQ
What is PEEK 30% Glass Filled Sheet?
PEEK 30% Glass Filled Sheet is a high-performance PEEK engineering plastic reinforced with approximately 30% glass fiber to improve stiffness, strength, dimensional stability, and creep resistance.
Is PEEK 30% glass-filled sheet an insulating material?
PEEK has good electrical insulation properties, and glass-filled PEEK can be used for suitable electrical insulating components. For critical electrical applications, the required dielectric strength, volume resistivity, dielectric constant, operating temperature, and material grade should be confirmed before selection.
What is the difference between virgin PEEK and 30% glass-filled PEEK?
Virgin PEEK contains no reinforcing filler, while 30% glass-filled PEEK incorporates glass fiber reinforcement. Glass-filled PEEK generally provides higher stiffness, improved dimensional stability, and better resistance to creep under load.
Is PEEK 30% glass-filled suitable for high-temperature applications?
Yes. PEEK is a high-temperature engineering thermoplastic, and glass fiber reinforcement can improve dimensional and mechanical stability under elevated-temperature conditions. The actual operating temperature should be evaluated according to the specific grade and application.
Can PEEK 30% glass-filled sheets be machined?
Yes. The material can be cut and machined into precision components such as bushings, bearings, seals, valve parts, and structural components.
Is PEEK 30% glass-filled chemically resistant?
PEEK has excellent resistance to many chemicals. However, compatibility depends on the specific chemical, concentration, temperature, exposure time, and mechanical stress.
Can you supply custom-size PEEK 30% glass-filled sheets?
Yes, custom sheet dimensions and cutting services can be discussed according to project requirements and production capability.
Can PEEK 30% glass-filled be used for aerospace applications?
It can be considered for demanding aerospace and defense applications where its mechanical strength, dimensional stability, chemical resistance, and temperature performance meet the project requirements. Required specifications and certifications should be confirmed before use.
Downloads
Available upon request:
- PEEK 30% Glass Filled Sheet Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Adhesive Tape Selection Guide
- Product Brochure
- Die-Cutting Capability Guide
Please contact our sales team if you require the latest technical documentation.